42"/ 57" OLYMPIA MODEL V40-L CNC VERTICAL BORING MILL WITH

Machining diameter range 2-57"
Table diameter 42"
Maximum faceplate torque 3,000 LB F
Maximum machining height(with longest tool installed) 14"
Maximum distance between live spindle face and table
working surface 27.5"
Maximum workpiece weight 15,400 LBS
Maximum ram travel (Z-Axis) 20"
Maximum head travel (Z-Axis) -15"/35"
(without travel for tool changer)
Ram size 8.3" x 8.3"
Number of tools in automatic tool changers 32 x 2=64
Maximum tool shank height 1"
Main drive motor capacity 80 HP
Table cutting speed range (infinitely variable) 10-500 RPM
Working feed rates (infinitely variable)
Per faceplate revolution 0.0004-19.5"
Per minute 2-200"
Fast travel speed 400 IPM
Maximum cutting force 6,600 LBS
Tool clamping force 22,000 LBS
Maximum tool length 12"
Positioning accuracy +/- 0.0003"
Repeatability +/- 0.0001"
C-Axis feeds
Maximum machining feed rate 2 RPM
Maximum rapid feed rate 3.5 RPM
C-Axis resolution 0.001 Deg.
C-Axis accuracy +/- 10 Arc Sec.
(+/- 0.001" at 20.0" radius) Undirectional
Cont. on

C-Axis feeds (cont.)
C-Axis repeatability +/- 3 Arc Sec.
Undirectional
Live spindle taper BT50
Live spindle positioning accuracy +/- 5 Arc. Min.
at 0 and 180 Deg. for probe calibration
Live spindle maximum speed 4,000 RPM
Live spindle drive motor 27 HP
Automatic tool changers
Total turning tool capacity 44
Total live tool capacity 20
Maximum size of turning toolholder installed
All pockets full 3"
Every second pocket empty 6"
Maximum tool weight (not including the weight of turning
toolholder) 25 LBS
Maximum tool change 35 Sec.
Maximum tool change from chip to chip 43 Sec.
Turning tool repeatability (radial and axial) +/- 0.00015"
Live tool change repeatability (radial and axial) +/- 0.00015"
Air
Air supply 176 CFM
Air pressure 90 PSI
Coolant
Low pressure
Coolant supply 8.8 GPM
Coolant pressure 75 PSI
Tank capacity 65 US Gal.
High pressure
Coolant supply 8.5 GPM
Coolant pressure 250 PSI
Tank capacity 65 US Gal.
Oil
Hydraulic oil supply 4.5 GPM
Hydraulic oil pressure 900 PSI
Hydraulic unit
Flow rate 4.5 GPM
Reservoir capacity 40 Gal.
Maximum temperature 140 F
Cont. on page 3
Electrics
Working voltage 460 V
Full load current 150 A
Total power supply 140 KVA
Electric current frequency 60 HZ

MOTOR SPECIFICATIONS

Wired 460 Volt