PRODUCTION MODEL 101 DUAL HEAD TUBE GRINDER/POLISHER

GENERAL SPECIFICATIONS:

Number of heads Two
Minimum O.D. .750"
Maximum O.D. 6.00"
Voltage 440 VAC
This machine is designed to use abrasive belts to apply a polished finish
to round tubular products.
The tube is driven through the machine by leather or rubber belts that ar
e held in tension by two
rollers. The upper roller is rotated by a 1 HP US Motors Vari-Drive moto
r and gearbox integrated
system. A dial on the system allows the operator to manually adjust the
speed of the drive belt,
and thus the speed of the tube through the polisher.
The abrasive belt is rotated by a urethane coated roll which is driven by
a 10 HP motor via a set
of pulleys and belts.
The belt is held in tension by a steel roll that is mounted on the end of
the air cylinder. This roll
is adjustable at an angle to facilitate belt tracking. Air regulators ar
e provided for tension adjustment.
The machine has two stations as described above.
An electrical cabinet with all electrical components and main disconnect
is supplied. Ammeters are
supplied to monitor the amperage of the motors driving the abrasive belts
.
Twenty foot long height adjustable inlet and outlet tables are supplied.
These tables have nylon
coated rolls.
There are two of these machines available.
Dust collection is accomplished by a cyclone type dust collector driven b
y a 10 HP motor. Both units
share one dust collector. Manifold piping to connect the polishing units
to the dust collector is
provided.