CINCINNATI MILACRON #2 CINTERNAL CNC INTERNAL GRINDER

Max. swing inside guard 24"/28"
Max. swing 90 degrees swivel 17"
Max. swing in chuck guard 24"
Workhead angular adjustment 0 to 90 deg.
Workslide travel (X-axis) 16"
Cross slide travel 16"
Longitudinal bridge adjustments (Z-axis) 12"
Maximum table travel 20"
Grinding stroke 17" max.
0" min.
Wheel slide travel 6"
Positioning adjustment on Z-axis 12"
Wheelhead Motor, 60 Cycle
Power output 10 HP
Motor speed 3600 RPM
NEMA Frame 217
Wheelhead RPM
Range 1000-150,000 RPM
Default-value 0
Min. Increment 1 RPM
Workhead spindle flange to wheel slide 39-3/8" max.
0" min.
Workhead load capacity 1000 lbs CG
from flange 6"
Workhead rotational accuracy within .000030"
Spindle load capacity (within 6" of flange) 1000 lbs.
Center of spindle flange to floor 43.75"
Grinding axis speed 99.9 IPM max./ 0 min.
Rapid axis speed 400 IPM
Feed rates 0 to .999 IPM
Workhead speeds
Reversible & variable 30 to 999 RPM
in 1 RPM increments
(cont'd)
Overall dimensions 65" x 173" x 113"
Weight (approx.) 12,000 Lbs.

MOTOR SPECIFICATIONS

Axis drive motors (PWM) 6 ft/lb (8.13 Nm)
torque @ 1300 RPM
Workhead motor 4-1/2 HP (3.36 kw) @
4500 RPM
Wheelhead motor 10 HP (7.46 kw) @
3600 RPM
Hydraulic pump motor 1/3 HP (0.249 kw) @
1800 RPM