TOSHIBA MODEL BTD-200 QE TABLE TYPE 4-AXIS CNC BORING MILL

X-axis travel (Cross movement of table) 1,000 (39.4)
Y-axis travel (Vertical movement of spindle head) 1,000 (39.4)
Z-axis travel (Longitudinal movement of table) 700 (27.6)
W-axis travel (quill extension) 400 (15.7)
Distance from table surface to spindle
centerline 0-1,000 (0-39.4)
Distance from table centerline to spindle
gage plane 450-1,150 (17.7 - 45.3)
Table working surface 1,000 x 1,000 (39.4 x
39.4)
Table loading capacity 2,500 (5,500)
Table surface configuration/pitch of T-slots
160mm (6.3 in.) 6 T-slots, size 22mm
-0.87
Minimum table indexing angle 0.0001 deg.
Rotating spindle diameter 110 mm (4.3 in.)
Extended quill diameter 200 mm (7.9 in.)
Spindle speed 15~1,600 RPM
Number of spindle speed ranges 1 range
Type of spindle taper hole 7/24 taper No.50
Spindle bearing inner diameter 110 mm (4.3 in.)
Rapid transverse rate
X,Y,Z 12,000 mm/min (472.4
ipm)
W 5,000 mm/min (196.9
ipm)
B 500 deg/min
Feedrate X,Y,Z 1~6,000 mm/min
(0.04 ~ 236.2 ipm)
Type of tool shank CAT 50
Type of retention knob MAS P50T-1 {45 deg.}
Tool storage capacity 40
Maximum tool diameter (when pots are full) 125 mm (4.9 in.)
Maximum tool length 400 mm (15.7 in.)
Maximum tool mass 25 kg (55 lbs.)
Method of tool selection Pot address random
short-cut
30 min. rating/cont. rating AC15/11 kW (AC20/15
HP)
(Con't)
Electric power supply ac200/220v 10%, 50/60
Hz 2%
Machine height 3,140 mm (123.6 in.)
Floor space 4,670 x 6,690 mm
(183.9 x 263.4 in.)

MOTOR SPECIFICATIONS

20 HP main spindle drive motor