PIETRO CARNAGHI MODEL AC20TM/1800 3-AXIS CNC VERTICAL

Max. Turning diameter 2000mm
Table-Pallet diameter 1800mm
Max. Allowable weight 15 Ton
Standard RPM 1-320
Turning power 60-100 Kw
Standard turning height 1200mm
Option of different turning height 1500
Carriage - Hydrostatic slideways X/Z-Axes
Ram section 250 x 250mm
Ram stroke Z-Axis 1250mm
Option of different ram stroke 1500mm
Milling power 37 Kw
Standard RPM 10 - 3000
Rapid feeds X-Z Axes 15,000 mm/min.
Pietro Carnaghi Model AC20TM/1800 VTL Main structure w/full X-axis
stroke automatic self-leveling positioning cross rail table diameter
1,800mm (70.8") with 4 independant jaws max. turning diameter to 2,000mm
(78.7") max. turning height to 1,200 (47.2"), Seimens Sinumerik 840 D CNC
& interface , two speed ranges 1-320 rpm Hydrostatic carriage and ram wit
h
live spindle, 50 hp, 3,000 rpm, Z-axis stroke of 1,250mm (49.2"), ram cro
ss
section 9.8" x 9.8 positioning C-axis table chip and coolant guards
w/motorized door, guarding height to maximum turning height M102 vertical
milling head L115P Carnaghi turning toolholder Heidenhain scales for line
ar
axis 460v,3ph, 60hz chiller unit for table bearing lubrication equipment,
hydraulic equipment, coolant system, machine lighting, Carnaghi leveling
system specs - additional options maximum turning height on table/pallet
with standard turning toolholder 1,500/1,270mm (59.0"/50.0") 100kw
(134hp) table motor 24 position tool storage unit w/modular pockets to
store turning toolholders, ram accessories and vertical or horizontal
storage of #50 tapertools and modular lathe tools for left ram 40
position vertical position tool chain for #50 taper tools and modular
lathe tools with dual gripper tool exchange unit for right ram high
pressure colant system
Cont. on

(cont.)
Maximum pressure 300 bar (4,410psi) automatic pallet changer,
type ATF, with two cast iron pallets w/four independant jaws, powered
rotary set-up station and indicator stand. Additional ram carriage
250 x 250mm (9.8" x 9.8") independant C-axis drive motor & gear box
turning toolholder width 230mm (9") for 38 x 38mm (1.5" x 1.5") square
lathe tool for high pressure toolholders for CAPTO C6/KM63 for right
and left rams. Part probing measuring system with Renishaw head tool
probe system for turning tools (Renishaw) S/N 03603.