HAAS CNC MINI MILL

Travels
Max. X-Axis 16"
Max. Y-Axis 12"
Max. Z-Axis 10"
Spindle nose to table (min.) 4"
Spindle nose to table (max.) 14"
Standard table
Length 36" (total)
Width 12"
Max. weight on table 500 LBS
T-Slot width 0.625"
T-Slot center distance 4.331"
Number of T-Slots 3
Spindle
Taper size #40 Taper
Spindle max. speed 6,000 RPM
Drive system Direct speed belt drive
Max. torque standard 33 ft-lb @ 1200 RPM
Spindle motor max. rating 7.5 HP
Bearing lubrication Air/Oil Injection
Cooling Air cooled
Axis Motors
Max. thrust rating X 2,000 LB
Max. thrust rating Y 2,000 LB
Max. thrust rating Z 2,000 LB
Feedrates
Rapids on X axis 600 in/min.
Rapids on Y axis 600 in/min.
Rapids on Z axis 600 in/min.
Max. cutting 500 in/min.
Cont. on

(cont.)
Tool changer
Capacity standard 10
Tool type / taper CAT 40
Max. tool diameter Std (full) 3.5"
Max. tool weight 12 LB
Changer type standard (optional) Carousel
Tool-to-Tool (avg) 3.6 sec.
Chip-to-Chip (avg) 5.0 sec.
Accuracy (Single Axis)
Positioning (+/-) 0.0002"
Repeatability (+/-) 0.0001"
General
Door opening width 24.00"
Machine weight 3,400 LBS
Max. operating width 80"
Max. operating depth 78"
Air required 4 CFM @ 100 PSI

MOTOR SPECIFICATIONS

208 volt 3 Phase or 240 Volt single phase
Wired Single phase
9 KvA
7.5 HP