28" X 26' VDF WOHLENBERG HANNOVER MODEL E710 HEAVY DUTY

Height of centers over flat ways 13.97"
Swing
Over bed 28.74"
Over carraige 18.70"
Over pit, in front of faceplate 31.19"
Over gap 41.73"
Length of pit in front of faceplate 14.17"
Length of gap 15.75"
Faceplate
Diameter, maximum 27.95"
Internal clamping range 7.08...28.34"
External clamping range 3.15...24.01"
Main spindle
Spindle bore 3.228"
Spindle diameter in front bearing 6.299"
Spindle nose Short taper DIN 55 022 11
Taper in center sleeve Morse No.6
Main spindle speeds
24 Speeds through gears 4.5...900 RPM
12 Speeds through belt 90...1120 RPM
Feed rates 64
Longitudinal 0.004...5.51"
Traverse 0.0002...2.795"
Threads
145 Metric 0.4...560 mm
143 Whitworth 70...1/20 tpi
111 Module 0.1...140 module
161 Diametral - pitch 280...1/5 pitch
Cont. on

Carriage
Length of carriage 33.46"
Stroke of cross slide 18.90"
Width of cross slide guidways 13.97"
Stroke of top slide 9.84"
Max. cross sectional area of tool 3.15"
Height of centers over tool location 1.574"
Tailstock
Diameter of quill 4.92"
Stroke of quill 12.40"
Taper in quill Morse No.6
Max. workpiece weights
Between centers without steady rest 8,820 LBS
With 1 steady rest 11,020 LBS
With 2 steady rest 13,890 LBS
Unsupported in faceplate with center of gravity
distance (9.48") 3,310 LBS
Weight (approx.) 25,000 LBS

MOTOR SPECIFICATIONS

30 HP Main drive motor