14 SPINDLE DEKA SOUTHBEND MODEL 712-3 MULTIPLE SPINDLE

Feed stroke of table, maximum 6"
Distance between head flange and table top
Maximum 26"
Minimum 12"
Opening of head, F-B x L-R 8-1/2" x 13"
Center of head to face of ways on column 8-1/4"
Number of spindle drives 14
Working surface of table, F-B x L-R 14-1/2" x 18-1/2"
Back edge of working surface table top to face of ways on column
1-3/4"
Overall table size, F-B x L-R 19" x 24-1/4"
Standard feeding stroke 6"
Maximum feeding pressure 2,800 lbs.
Range of feeding rate 0 to 90 IPM
Rapid traverse rate 120 IPM
Drilling capacity (Mild steel) at 60 SFM - 3" feed per minute
(14) 1/4" drills
(10) 5/16" drills
(8) 11/32" drills
Drilling capacity (Gray cast iron) at 70 SFM - 4" feed per minute
(14) 9/32" drills
(10) 3/8" drills
(8) 13/32" drills
(CONT.)
Tapping capacity (Mild steel)
(14) 8 to 32 N.C.
(10) 1/4 to 20 N.C.
(8) 5/16 to 18 N.C.
Tapping capacity (Gray cast iron)
(14) 8 to 32 N.C.
(10) 1/4 to 20 N.C.
(8) 5/16 to 18 N.C.
Approximate weight 2,300 lbs.

MOTOR SPECIFICATIONS

3 HP 3/60/208-220/440 Spindle drive motor & controls
1.5 HP 3/60/208-220/440 Hydraulic motor
1/6 HP 3/60/220/440 Coolant pump motor