25" X 120" AXELSON MODEL E HEAVY DUTY ENGINE LATHE

Capacity
Swing over bedways and carriage wings 28-1/2"
Swing over cross slide 18-1/2"
Distance between centers, base machine tailstock flush 48
"
Permissible tailstock overhang 7-1/2"
Standard tool shank dimensions 1" x 2"
Dimensions
Bed length, nominal, base machine 10' - 0"
Bed length, actual, base machine 10' - 10"
Bed width 26"
Bed depth 16-3/4"
Height, floor to center line of spindle 44-9/16"
Headstock ways (center to center) 14-7/8"
Carriage ways (center to center) 22-3/8"
Threading and Feed Capacity
Number of threads 45
Range of threads per inch 1 to 30
Number of feeds 81
Range of feed per revolution of spindle .005" to .351"
Diameter of lead screw 2"
Lead screw threads per inch (Acme) 2
Diameter of feed rod 1-5/8"
Width and pitch of rack 1-3/4" - 6
Drive
Type of drive Direct
Recommended HP of motor 25 to 40
RPM of motor, 60-cycle 1800
(CONT.)
Tailstock
Length of bearing on ways 21-3/4"
Diameter of tailstock spindle 4-1/2"
Travel of tailstock spindle 16-3/4"
Maximum set-over toward operator 1-1/2"
Maximum set-over away from operator 1-1/2"
Headstock
Spindle bearings (Timken type O-Precision) 2 front
Double matched precision ball bearings rear
Spindle nose D-1, 11" Cam lock
Diameter of hole through spindle 2-5/16"
Spindle speed range, std. (60-cycle) 6 to 750
Number of spindle speeds 24
Centers, Morse taper No. 5
Diameter of face plate 27-1/2"
Diameter of drive plate 12-1/2"
Length of bearing on bed 40"
Carriage
Length of bearing on ways 38"
Width of cross slide 11-1/8"
Travel of cross slide 16-3/4"
Width of tool slide 9-1/8"
Travel of tool slide 8"
Taper Attachment
Length of taper turned at one setting 24"
Maximum taper per foot (included) 5"
Maximum taper in degrees (with center line) 12 degree
s
Page 3 of 3
(CONT.)
Steady Rest
Capacity, standard 0 to 8-3/4"
Capacity, No. 1 oversize 6" to 14-3/4"
Capacity, No. 2 oversize 14" to 19-3/4"
Follow Rest
Capacity 0 to 5-3/8"
Weight
Base weight, approximate 16,350 lbs. Net

MOTOR SPECIFICATIONS

30 HP 240 volts, 1150/2300 RPM Reliance heavy duty DC motor