Sold

36" FELLOWS MODEL 36-6 VERTICAL GEAR SHAPER

GEAR SHAPER
Manufacturer:
FELLOWS
Model:
36-6
Year:
1968
Stock #:
12261
36" FELLOWS MODEL 36-6 VERTICAL GEAR SHAPER

One (1) - Model No. 36-6 FELLOWS Vertical Gear Shaping Machine, suitable for the manufacture
of internal and external spur gears, (as well as helical gears with proper guides), up to
36" (914mm) pitch diameter, 6� (152.4mm) face-width, and 3 DP (module 8.5)

Serial No. 33619 (New 1966)

The machine would correspond to the hereto attached copy of factory literature, featuring the following:

EQUIPMENT / FEATURES:

� 7-1/2 HP Main Motor, 1800 rpm
� standard straight spur guide
� 4" diameter hollow cutter spindle
� depth feed and number of cuts dial controlled
via adjustable trip dogs
� riser assembly of 6� (152.4mm) height
� rapid rotation of work spindle
� assorted change gears
� T-slotted work sub-table
� work table fixture
� three (3) cutter adaptors
� self contained coolant system, pump & piping
� full complement of electrics (motors/controls)
(presently arranged for 440 volt, 3-phase, 60Hz)
� guards, covers,
� misc change gears

PRINCIPAL SPECIFICATIONS:

Maximum pitch diameter (External) ...................................... 36" (914.4mm)
Maximum pitch diameter (Internal) ....................................... 36" (914.4mm)
Maximum workpiece & fixture diameter ................................ 40" (1016mm)
Maximum face width .............................................................. 6" (150mm)
(depending on cutter relief required)
Maximum helix angle (w/proper guides) ................................ 45 degrees
Maximum distance, centerline of cutter
spindle and work spindle for externals,
(w/saddle-backed off) ............................................................ 21.5" (546mm)
Maximum distance, centerline of cutter
spindle and work spindle for internals .................................... 13.75" (349.25mm)
One (1) - Model No. 36-6 FELLOWS Vertical Gear Shaping Machine, suitable for the manufacture
of internal and external spur gears, (as well as helical gears with proper guides), up to
36" (914mm) pitch diameter, 6� (152.4mm) face-width, and 3 DP (module 8.5)

Serial No. 33619 (New 1968)

The machine would correspond to the hereto attached copy of factory literature, featuring the following:

EQUIPMENT / FEATURES:

� 7-1/2 HP Main Motor, 1800 rpm
� standard straight spur guide
� 4" diameter hollow cutter spindle
� depth feed and number of cuts dial controlled
via adjustable trip dogs
� riser assembly of 6� (152.4mm) height
� rapid rotation of work spindle
� assorted change gears
� T-slotted work sub-table
� work table fixture
� three (3) cutter adaptors
� self contained coolant system, pump & piping
� full complement of electrics (motors/controls)
(presently arranged for 440 volt, 3-phase, 60Hz)
� guards, covers,
� operators manual, parts list, wiring diagrams

PRINCIPAL SPECIFICATIONS:

Maximum pitch diameter (External) ...................................... 36" (914.4mm)
Maximum pitch diameter (Internal) ....................................... 36" (914.4mm)
Maximum workpiece & fixture diameter ................................ 40" (1016mm)
Maximum face width .............................................................. 6" (150mm)
(depending on cutter relief required)
Maximum helix angle (w/proper guides) ................................ 45 degrees
Maximum distance, centerline of cutter
spindle and work spindle for externals,
(w/saddle-backed off) ............................................................ 21.5" (546mm)
Maximum distance, centerline of cutter
spindle and work spindle for internals .................................... 13.75" (349.25mm)
No. 36-6 FELLOWS (s/n 33619) /Continued:

Maximum distance work-spindle surface to cutter-spindle
face w/cutter ram in uppermost position ��...................... 15.75� (400mm)
Maximum diametral pitch spur gears .................................... 3 DP (8.5-module)
Maximum diametral pitch helical gears ................................. 4/5 DP (6.4/5module)
Work spindle bore diameter .................................................. 5.875" (149.23mm)
Cutter spindle taper ............................................................... #18 Jarno
Twelve (12) stroking speeds, w/ranges ................................. 18-300 S.P.M.
Machine overall length ........................................................... 92" (2336.8mm)
Machine overall width ............................................................ 60" (1524mm)
Machine overall height ........................................................... 88" (2235mm)
Machine net weight, approx. .................................................. 15,500 lbs. (7,045 kGs)

* * * * *
PRICE: For the machine delivered F.O.B.
truck, Prospect Heights, IL . � ....................................................

EXTRA: For packing/preserving for sea-worthy
transport ����������������............................. ( upon request )

TERMS: Net cash w/formal purchase order, before shipment

DELIVERY: Machine ready for immediate delivery

* * * * *

Note:

The aforementioned description and listing of accessory equipment is correct and accurate to the best of our knowledge. However, it is not binding in any regard, as we reserve the right to change and/or alter same
without prior notice. Consequently, the buyer is responsible for confirming same, upon physical inspection
and inventory of the machine and all related accessories.

Note:

Loading...