OKUMA TWIN STAR LT300-MY TWIN TURRET TWIN SPINDLE CNC LATHE WITH Y-AXIS

Okuma LT300-MY Turning Center

Okuma Multi-Axis Turning Center
Manufacturer: Okuma Corporation (Made in Japan)
Model: Twin Star LT300-MY
DOM: 11-2008
Electrics: 220-480 Volt/3 Phase/60 Cycle/FLA: 151.5-69.5 Amps
Power: 57.7 KVA

Features and Specifications:
…Swing: 21.65″ Over Bed
…Distance Between Centers: 47.24″
…Turning Diameter (max): 13.78″ x 7.87″ Length
…Bar Capacity Thru Spindle: 2-3/4″
…Left and Right Spindle Capacities:
……38 – 5,000 RPM
……Diameter: 3.94″
…Travels:
……Z – 36.61″ and 36.22″ / Rapid: 1574.8 ipm
……W – 37″ / Rapid: 1574.8 ipm
……X – 10.63″ and 9.06″ / Rapid: 1,181.1 ipm
……Y – -3.15″ to 3.15″ / Rapid: 1,023.62 ipm
……C – 360 deg. at min control angle of 0.001 / Rapid: 400 RPM
…Upper and Lower Turret:
……Type: V12
……No. of Tools: 12
…CNC Control: Okuma OSP-P200L
…Bar Feeder: ATS ML-580
…Scrap Conveyor
…Chip Blaster High Pressure Extraction Unit
…Transformer
…Tooling:
……Upper Turret: 12 holders, 8 are live tooling holders
……Lower Turret: 11 holders, 3 are live tooling holders
……Five (5) holders in cabinet, 1 is live tooling holder
……Two (2) collet chuck assemblies (see pic for model no.)

Machine Dimensions (manual): 139″ x 87″ x 92″ (n/i accessories)
Machine Weight (manual): 26,400 lbs.

Note: Specifications are taken out of the machine operation manual.