13" X 60" OKUMA GA-36FII CNC ANGLEHEAD GRINDER, NEW UNUSED

GA-36FII
CNC EXTERNAL GRINDER - Base Kit
350, 650, 1000, beds

Appearance may vary based on final specification

Machine DistancebetweenCenters WheelDiameter
GA-36FII 1500 mm 610 mm
(24 ins)
(59.05 ins)

SUBJECT TO CHANGE WITHOUT NOTICE - PROPOSAL BASED ON 17.10 STANDARD

CAPACITY
GA-36FII
General
The Okuma GA-36FII CNC O.D. Grinding Machine can perform the following grinding applications.
• Center work and optional chuck work operations.
• Straight plunge, multi-plunge, cylindrical traverse, face plunge and tapered traverse grinding operations.
• Taper, arc and complicated form grinding.
The GA-36FII is controlled by the Okuma OSP control and is capable of simultaneous two-axis control. This model is extremely flexible in handling a wide variety of workpiece shapes in a simple data setting. Addition of automation accessories will make sure that the Okuma GA-36FII CNC O.D. Grinder is an excellent part of the most up to date Flexible Manufacturing System.
Accuracy Assurance
• The bed is designed to be thermally symmetric. In addition, coolant is directly disposed of from the grinding point to the rear of the machine using a duct to minimize thermal displacement of the machine.
• Decreased friction on the table and wheelhead guide ways ensures accurate infeed of sub microns. Furthermore, brushless AC servo motors developed on the basis of OKUMA's sophisticated CNC technology have a precision of 0.1 micron least command increment at a feedrate of 16 m/min. (52.5 ft/min.). Incorporation of this high technology results in high accuracy profile dressing and profile grinding.
• Wheelhead, table feed and the endwise face locator positioning is performed by entering the corresponding program data.
Wheel Spindle
The wheel spindle is rigidly supported by an Okuma hydrodynamic bearing (also called a non-concentric sliding bearing) on both the wheel side and wheel pulley side of the spindle. Wedge-shaped oil films give rigid support for the spindle for true-center rotation with a minimum of axis displacement.
The high load carrying capacity with excellent vibration dampening characteristics of the Okuma wheel spindle permits faster and heavier stock removal and shorter spark out times.
Temperature rise of the wheel spindle is maintained at "room temperature + 6.5ºC" through a variety of improvements. Furthermore, it is designed to minimize the displacement of the spindle center due to thermal deformation.

Axis Servo Drives
• Both X and Z axes are driven by the ultra-precise ball screws and pre-loaded.
• Ball screw nuts, center mounted between the ways for optimum drive conditions.
• The 40mm (1.57 in.) X-axis ball screw is implemented along a Turcite flat and V way.
• The 45mm (1.77 in.) Z-axis ball screw is implemented along a Turcite flat and V way.

Item
MODEL

CAPACITY:
Swing over table Unit

mm (in.)

350 Specific
GA-3 650

330 ations
4FII
1000

(12.99)

1500
Distance between centers 1500
(59.05)
Max. grinding dia. mm (in.) 300 (11.81)
Max. workpiece weight (centers) kg (lb) 150 (330)
Max weight -Chucking with kg x mm (lb x 40 x 200
Dead/Live workhead in) (88 x 7.87)

WHEEL SPINDLE:
Wheel size(OD x W x ID) mm (in.) 610 (24) x 135 (5.31) x
254 (10.00)
Maximum peripheral speed m/min. 2,700 (8859)
(fpm)
Max. wheel width for standard mm (in.) 85 (3.35)
wheel flange.
Wheel speeds rpm Variable through inverter control

WHEEL SLIDE (X AXIS):
Setting angle degree 60
(in reference to the Z axis)
Overall travel mm (in.) 370 (14.57)
Travel per pulse handle revolution mm (in.) 0.1, 1.0, 5.0(0.01, 0.1, 0.5)
Travel per pulse handle graduation mm (in.) 0.001, 0.01, 0.05
(0.0001, 0.001, 0.005)
Auto-infeed speed mm/min.(ipm) 0.0012 -6,000
(0.00005 -236)
Positioning speed mm/min.(ipm) 16,000 (629)

SPECIFICATION

Item Unit Specifications
MODEL GA-36FII
1500
WORK SPINDLE (C AXIS)
Center Hole MT #5
Spindle speed range rpm 25~600
FOOTSTOCK:
Center taper (type size) MT # 5
Taper Adjustment Amount (manual) mm (in.) +/-0.08 (0.0031)
Quill travel (hydraulic) mm (in.) 70 (2.76)
MOTORS:
Wheel spindle motor kW (hp) 15 (20) Option: 22 (30)
Wheel slide (X axis) motor kW (hp) 2.9 (3.9) BL motor
Wheel slide (Z axis) motor kW (hp) 2.9 (3.9) BL motor
Work spindle motor kW (hp) 3.6 (4.8) BL motor
Hydraulic pump motor kW (hp) 0.75 (1)
Coolant pump motor kW (hp) 0.4 (0.53)
TANK CAPACITY:
Coolant Tank liter (gal) 200 (52.8)
Wheel spindle lube tank liter (gal) 20 (5.3)
Table way lube tank liter (gal) 4.2 (1.1)
Hydraulic oil tank liter (gal) 35 (9.2)
MACHINE HEIGHT: mm (in.) 2,000 (78.7)
REQUIRED FLOOR SPACE - W x D * (maintenance space not included)

1500 mm (in.) 5,610 x 3,084 (220.86 x 121.42)
MACHINE WEIGHT

1500 Kg (lbs.) 9,000 (19,800)

* Note. Floor space to be confirmed with detail machine specification

SPECIFICATION

ITEM DESCRIPTION TOTAL

BASE MACHINE SPECIFICATION
OKUMA GA-36FII
CNC Angle Head Grinder with OSP-P300GA Control
GA-36FII
USA Standard Specifications 350 650 1000 1500

1 Inch spec 1 set 1 set 1 set 1 set
2 Plate： English 1 set 1 set 1 set 1 set
3 Color： 2011 STD 1 set 1 set 1 set 1 set
4 Dead center workhead MT5 1 set 1 set 1 set 1 set
5 Tailstock quill stroke： 70 mm 1 set 1 set 1 set 1 set
6 Wheel spindle motor： 15 kW 1 set 1 set 1 set 1 set
7 Grinding wheel speed： 45 m/sec 1 set 1 set 1 set 1 set
8 Coolant tank 200L and separator SMF8 1 set 1 set 1 set 1 set
9 Wheel dressing device 1 set 1 set 1 set 1 set
10 Diamond tool： D5 1 set 1 set 1 set 1 set
11 Coolant nozzle 1 set 1 set 1 set 1 set
12 Wheel flange: width 35 - 85mm 1 set 1 set 1 set 1 set
13 Carbide-tipped center： MT No.5 2 sets 2 sets 2 sets 2 sets
14 Hydraulic oil-lube tank 1 set 1 set 1 set 1 set
15 Full-enclosure shielding 1 set 1 set 1 set 1 set
16 Preparation of Amplifier for process control (Marposs, P5) 1 set 1 set 1 set 1 set
17 Wheelhead attachment Marposs, T25G 1 set 1 set 1 set 1 set
18 Door interlock 1 set 1 set 1 set 1 set
19 IEC standard 1 set 1 set 1 set 1 set
22 UL prep spec 1 set 1 set 1 set 1 set
21 Transformer 220-480V 1 set 1 set 1 set 1 set
22 Spare parts： A rank 1 set 1 set 1 set 1 set
23 Balancing arbor 1 set 1 set 1 set 1 set
24 Lifting tool 1 set 1 set 1 set 1 set
25 Manuals (1set of book style and 1set of CD) 2 sets 2 sets 2 sets 2 sets
26 Pulley cover for auto wheel balancer 1 set 1 set 1 set 1 set

BASE MACHINE SPECIFICATION

OSP-P300GA Base specification
See OSP-P300GA General Proposal
Plus following additional specifications
1 TFT color 1 set 1 set 1 set 1 set
2 OSP-P300GA I-GAP-D kit 1 set 1 set 1 set 1 set
3 I-GAP+ 1 set 1 set 1 set 1 set
4 User task 2 1 set 1 set 1 set 1 set
5 Programmable message function 1 set 1 set 1 set 1 set
6 Real 3D simulation 1 set 1 set 1 set 1 set
7 3-step status indicator lamp： Type C 1 set 1 set 1 set 1 set
8 NC operation monitor 1 set 1 set 1 set 1 set
9 Displays wheel change indication 1 set 1 set 1 set 1 set
10 Displays wheel change warning 1 set 1 set 1 set 1 set
11 Auto grinding wheel straightening 1 set 1 set 1 set 1 set
12 Cycle time reduction 1 set 1 set 1 set 1 set
13 Inch / metric switchable 1 set 1 set 1 set 1 set
14 RS232C 1ch 1 set 1 set 1 set 1 set
15 MTconnect 1 set 1 set 1 set 1 set
16 API Library 1 set 1 set 1 set 1 set
17 AC100V power supply (yojitsu#12405) 1 set 1 set 1 set 1 set