2022 MAZAK VC-EZ26 Precision 3-Axis CNC Vertical Machining Center

Specifications Unit VC-Ez 26
Capacity Table width in / mm 55.12 in / 1400 mm
Table depth in / mm 24.02 in / 610 mm
Table Weight Capacity Table Weight Capacity lbs / kg 3,306 lb / 1,500 kg
Spindle Face to Table Surface Min - Max in / mm 3.93 in (100 mm) / 28.93 in (735 mm)
Rapid Rates Rapid Rates ipm 1417 IPM
Spindle Spindle Taper CAT-40
Maximum Speed rpm 12000 rpm
Motor Output (5-minute rating) hp / kw 25.0 hp / 18.5 kw
Torque ft-lbs / N-m 70.4 ft-lbs / 95.5 N-m
Magazine Number of Tools Standard / Optional 30
Feed Axes Travel (X Axis) in/mm 50.00 in / 1270 mm
Travel (Y Axis) in/mm 25.98 in / 660 mm
Travel (Z Axis) in/mm 25.00 in / 635 mm
Maximum Tool Diameter Without adjacent pockets empty in / mm 2.95" / 75mm
With adjacent pockets empty in / mm 5.94" / 150mm
Maximum Tool Length in / mm 13.78" / 350mm
Maximum Tool Weight lbs / kg 17.64 / 8
Tool Change Time Tool to tool sec 2.2 sec.
Dimensions Machine Depth in / mm 118.83" / 3018 mm
Machine Width in / mm 132.08" / 3355 mm
Machine Height in / mm 121.89" / 3096 mm
Machine Weight lbs / kg 16,755 lbs. / 7600 kg
The Mazak VC-Ez 26 is defined by its Y axis. It has 25.98 in (660 mm) of Y travel, paired with 50 in (1,270 mm) of X and 25 in (635 mm) of Z, over a 55.12 in (1,400 mm) × 24.02 in (610 mm) table. The spindle is a CAT No.40 unit running to 12,000 rpm on a motor rated 18 kW (25 HP) for five minutes, and 30 tools ride in the magazine.
That Y figure changes what can go on the table. The VC-Ez 20 stops at 20.08 in (510 mm) of Y on a 49.21 in (1,250 mm) × 19.37 in (492 mm) table. With 24.02 in (610 mm) of table width and Y travel that reaches past it, the VC-Ez 26 has room for wider plates or a second line of fixtures behind the first.
Z does not grow along with Y. At 25 in (635 mm) it matches the VC-Ez 20, and the taper, speed and tool count are unchanged too, so this is the same cutting package set over a larger table. Shops that need more height have to go to the VC-Ez 32, which has 30.12 in (765 mm) of Z with 64.17 in (1,630 mm) of X and 32.08 in (815 mm) of Y.
A deeper Y axis asks more of the head and column, because the tool works further out from the machine's structure. Mazak's description of the VC-Ez series speaks to that: large headstock castings that it says eliminate torsional displacement under heavy side-load milling, and heavy base, column, saddle and headstock castings designed with high-speed and high-torque cutting in mind. Hybrid MX roller guideways are listed on all linear axes.
Mazak's table for this model does not give table load, rapid traverse or weight. On a table of this area the load rating deserves a direct question before a heavy plate job is quoted.
04
Full Specifications
Parameter Value
Table Size 55.12 in (1,400 mm) × 24.02 in (610 mm)
Spindle Taper CAT No.40
Max Spindle Speed 12,000 rpm
Spindle Motor 5min Rating 18 kW (25 HP) (5 min. Rating)
Tool Capacity 30 tools
X-Axis Travel 50 in (1,270 mm)
Y-Axis Travel 25.98 in (660 mm)
Z-Axis Travel 25 in (635 mm)
Specifications sourced from mazak.com — verified 2026-10-02