6" X 18" MODEL 1R LANDIS PLAIN HYDRAULIC CYLINDRICAL GRINDER

Nominal work swing 6"
Distance between work spindles 18"
Maximum grinding diameter with
Standard wheel zero diameter work on centers 10-1/2"
Work carriage traverse speed 2 - 240 IPM
Carriage traverse per turn of handwheel 200"
Swivel tale graduated
Inches per foot 4"
Degrees included angle 20 Degrees
Grinding wheel size 16" x 1" x 5"
Grinding wheel size spindle speeds 1500 & 1900 RPM
Maximum distance wheel centerline to work centerline12-1/2"
Minimum distance wheel centerline to work centerline with footstock removed
Work diameter reduction - per revolution of
- Handwheel 0.100"
- Fine feed knob 0.001"
Maximum hydraulic infeed - on diameter 0.090"
Rapid infeed stroke 1"
Headstock work center #10 Jarno
Footstock work center #6 Jarno
Headstock work speeds 60,90,150,225,400,600 RPM
Diameter hole thru spindle 1"
Approximate weight 4,100 Lbs.

MOTOR SPECIFICATIONS

5 HP 3/60/220/440 Wheel drive motor
1 HP 3/60/230-460 Hydraulic motor
1/4 HP 3/60/220/440 Headstock motor
1/4 HP 3/60/208-230/460 Lubrication motor