MORI SEIKI MH-63 CNC HORIZONTAL MACHINING CENTER

Travel
X Axis travel (longitudinal movement of table) 1,000mm/39.4"
Y Axis travel (vertical movement of spindle head)850mm/33.5"
Z Axis travel (cross movement of column) 920mm/36.2"
Distance from table surface to spindle center 50-900mm/2.0-35.4"
Distance from table center to spindle gage plane 150-1,070mm/
5.9-42.1"
Table
Working surface 630x630mm
24.8" x 24.8"
Table loading capacity 1,500kg/3,300 Lbs.
Minimum table indexing angle 1 Deg./
Rotary table 0.001Deg.
Table indexing time 4.5 Sec./90 deg.
Spindle
Max. spindle speed 60-6,000min-1
Type of spindle taper hole 7/24 Taper No. 50
Spindle bearing inner diameter 110mm/4.3"
Feedrate
Rapid traverse rate 20,000mm/787.4"
Feedrate 1-5,000mm/min
/0.01-196.9 IPM
Jog feedrate 0-1,260mm/min/
0-500-50 IPM
ATC
Type of tool shank CAT 50
Type of retention knob For MoriSeiki
90 Degree type
Tool storage capacity 120
Max. tool diameter (without adjacent tools) 120mm/4.7"
(300mm/11.8")
Max. tool length 500mm/19.7"
Max. tool mass 30kg/66Lb.
Method of tool selection Fixed address,shorter
route random access
Tool changing time 2.5/3.75 Sec.
Tool changing time 7.5/8.7 Sec.
APC
Number of pallets 2
Method of pallet change Turn type
Pallet changing time 14 Sec.
Max. workpieces swing diameter x workpiece height1,100 x 1,100mm
43.3'" x 43.3"
Motor
Spindle drive motor (30min./cont) AC 25/22kW
33.5/30 HP
Feed motor
X 3.8kW/5.1 HP
Y 5.2kW/7.0 HP
Z 5.2kW/7.0 HP
B 2.1kW/2.8 HP
Coolant pump motor 1.1kW/1.5 HP
Power supply
Electrical power supply 64.3kVA
Compressed air supply 71PSI/600L/min.
Tank capacity
Hydraulic oil tank capacity 40L/10.6 Gal.
Lubricant tank capacity 12L/3.2Gal.
(for slideway)
2+60L/0.5+15.8Gal.
(for spindle lubricatio
n
/cooling)
Coolant tank capacity 450L/118.8 Gal.
Dimensions and weight
Machine height 3,023mm(119.0")
Floor space 3,190mm/125.6" X
5,320mm/209.4"
Mass of machine 19,000kg(41,800Lb.)
Accuracy
Positioning accuracy .005mm/0.0002"
Repeatabilty +/- 0.001mm/
+/-0.0004"
Table indexing accuracy 0 Deg. 0'3"
(for 1 Deg. indexing)
Table indexing repeatability +/- 0 Deg. 0' 1"
(for 1 Deg. indexing)
Pallet chaning repeatability (X,Y & Z) 0.003mm(0.0001")
Page 3 of 3