14" X 60" KELLENBERGER MODEL UR175 X 1500 UNIVERSAL GRINDER

Capacity
Distance between centers 59"
Height of centers 4-59/64"
Maximum swing over table 9-13/16"
Table
Maximum travel 60-1/4"
Traverse per revolution of handwheel, coarse/fine .79"/
.097"
Traverse speeds, hydraulic, infinitely variable (approx.)
.06' to 19' min.
Minimum table oscillation .100"
Dwell of reversal, infinitely variable 0 to 5 second
s
Maximum swivel 7 degrees
Wheelslide
Maximum travel, with handwheel (coarse or fine) 8-5/8
"
Infeed per revolution of handwheel (coarse or fine)
.16"/.02"
Rapid advance and withdrawal, hydraulic 2"
Electro-mechanical infeed control by stepping motor
.000 500" to .399 500"
Micro-corrector of infeed, per division of dial .000
500"
Plunge grinding feed rates, roughing/finishing .000
010 to .000 190"/sec
Traverse grinding incremental infeed per table reversal at
either or both ends,
roughing/finishing .000 010 to .000 190"/sec
Automatic cycle return at table reversal left or right
Wheelhead
Grinding wheel OD x width x hole 16" x 2-1/2" x 5"
Grinding wheel for right hand spindle end 9" x 3/4" x 3
"
Spindle speeds 1530, 1750, 2040 & 2450 RPM
Grinding wheelhead swivels 270 degrees
with indexed stop every 90 degrees
Internal grinding spindle carrier, diameter 70 mm
(CONT.)
Workhead
Swivel 360 degrees
Speeds, infinitely variable 20 to 400 RPM
Internal taper of spindle Morse No. 5
Tailstock
Internal taper of quill Morse No. 3
Quill retraction 1-3/16"
Overall dimensions
Floor space required, approx. 213" x 80"
Weight, including standard equipment, net/gross 7900
lbs./9400 lbs.
Case measurements, L x W x H, approx. 134" x 73" x
75"

MOTOR SPECIFICATIONS

8.5kW Total power requirement
6 HP Wheelhead motor
1.2 HP Workhead motor