14" X 60" KELLENBERGER MODEL R175 X 1500 PLAIN GRINDER

Capacity
Distance between centers 59"
Height of centers 6-57/64"
Maximum swing over table 13-25/32"
Table
Maximum travel 60-1/4"
Traverse per revolution of handwheel, coarse/fine .79"/
.097"
Traverse speeds, hydraulic, infinitely variable (approx.)
.06' to 19' min.
Minimum movement necessary to reverse table 1/16"
Dwell of reversal, infinitely variable 0 to 5 second
s
Maximum swivel 7 degrees
Wheelslide
Maximum travel, with handwheel (coarse or fine) 8-5/8
"
Infeed per revolution of handwheel (coarse or fine)
.16"/.02"
Rapid advance and withdrawal, hydraulic 2"
Electro-mechanical infeed control by stepping motor
.000 500" to .399 500"
Micro-corrector of infeed, per division of dial .000
500"
Plunge grinding feed rates, roughing/finishing .000
190"/sec
Traverse grinding incremental infeed per table reversal at
either or both ends,
roughing/finishing .000 190"/sec
Automatic cycle return at table reversal left or right
Wheelhead
Grinding wheel OD x width x hole 20" x 3-1/4" (4) x 8
"
Spindle speeds 1220, 1360 & 1530 RPM
(CONT.)
Workhead
Swivel 360 degrees
Speeds, infinitely variable 20 to 400 RPM
Internal taper of spindle Morse No. 5
Tailstock
Internal taper of quill Morse No. 3
Quill retraction 1-3/16"
Overall dimensions
Floor space required, approx. 213" x 73"
Weight, including standard equipment, net/gross 8100
lbs./9600 lbs.
Case measurements, L x W x H, approx. 134" x 73" x
75"

MOTOR SPECIFICATIONS

10kW Total power requirement
7.5 HP Wheelhead motor
1.2 HP Workhead motor