SCHUTTE MODEL SF26L 6 SPINDLE PRECISION AUTOMATIC COLLET

Maximum bar diameter
Standard round 26 mm
Standard square 19 mm
Standard hexagonal 22 mm
Standard octagonal 24 mm
Spindle pitch circle diameter 224 mm
Bar feed, standard/special, up to 80/160
End-working slide traverses, standard
(Total traverse/working traverse), up to 63/39, 6 mm
End-working slide traverses
(Total traverse/working traverse), up to 100/63 mm
Cross-slide traverses (total traverse/working traverse)
Top slide, up to 32/20 mm
Centre slide, up to 32/20 mm
Bottom slide, up to 40/25 mm
Number of spindle speeds 47
Spindle speeds
Range I, from...to 710...4000/min
Range II, from...to 280...1600/min
Workpiece revolutions per operation
Standard, from...to 56...315
Reduced, from...to 25...125
Increased, from...to 85...475
Number of available cutting times per spindle speed 31
Cutting times 0,38 min/100 max
Standard, from...to 0,85...67 secs.
Reduced, from...to 0,38...23,6 secs.
Increased, from...to 1,25...100 secs.
Idle times, from...to 0,45...0,8 secs.
Length x width including control cabinet, standard 3225 x1205 mm
Approximate weight 4,050 kg.

MOTOR SPECIFICATIONS

Nominal drive motor rating 15 kw
Drive motor speed (50 Hz) 1500/min.