WERA MODEL RSM-150 PROFILATOR

Spindle bore 1.570"dia./2.360"dia.
Max. chucking dia. when using collets 3.150"
Max. chucking length through bore 23.620"dia. x 1.970"dia
.
Internal chucking min. .394"
max. 3.940"dia.
Max. hydraulic chuck pressure 294 PSI
Machine setting infinitely adjustable .001" graduations
Machining length max. 4.000"
Machining dia. max. 4.330"
Spline profile - 6 flute max. 2.000"
Involute spline profile max. dia. 3.000",
module 2.5
Longest supported length using tail0"
Spindle nose taper for chuck DIN 55021 size 6
Hole circle dia. for chuck 5.251"; 4 x 90 deg.
metric 12 thread &
5.251"
3 x 120 deg. metric 12
thread and 5.905";
6 x 60 deg. metric 12
thread
Dia. of cutter head R system .787" to 4.000" dia. ma
x.
R-Cutter head speeds RPM 740 - 2100 RPM
Feed .787" - 19.680" min.
Feed per revolution .003" - .031"
Max. hydraulic pump pressure 1,028 PSI
Hydraulic pump capacity 5.26 gal/min.
Standard ratio 321
Special ratio from 321 to 961
M-Cutter head dia. Standard 4" to 8" dia.

(CON'T)
Incline angle for cutter heads 0 deg. - Standard M
system +/- 20, inclinab
le
M & R systems
Working piece diameter 4.330" Standard M
system max. 2.360"dia.
inclinable M system
Standard ratios M system standard and
inclinable 21
Special ratios 31 and 51 standard M
system and inclinable M
system by change gears
Floor space required 7' x 8.5'
Weight 7,055 lbs.

MOTOR SPECIFICATIONS

Hydraulic pump motor 5.5 HP,1420 RPM/220
V, 60 Hz
Spindle drive motor 18 HP, 2500 RPM max.
Main voltage 220/440 V, 60 cycles
Total horsepower 26 HP, 30 Amp