BARNES MODEL MPE-25 MAGNETIC & FABRIC COOLANT FILTRATION

Combination Magnetic and Fabric Filter
Barnes Drill Combination Magnetic and Fabric Filter. This two-state file
r, consisting of a
magnetic separator and fabric filter, is for the removal of ferrous and n
on-ferrous contaminant and
is contained in a single, compact unit.
For positive, "two stage" coolant cleaning, Barnes Drill engineers have c
ombined the fabric filter
with the popular Barnes Drill magnetic separator. In the first stage, di
rty coolant flows through a
powerful magnetic field that removes ferrous particles. In the second st
ate, it passes through a
filter which removes non-ferrous contaminants.
With "two stage" coolant cleaning, fabric consumption is even lower than
on models without the
magnetic drum because the magnets remove the heavy ferrous load before t
he coolant reaches
the fabric.
Benefits to the user
1. For water soluble and cutting oils. Ferrous and non-ferrous applicatio
ns.
2. Removes 98% of all particles over 10 microns in size (measured by elec
tronic particle counter).
Depends on application and fabric used.
3. Leaves minimum contaminant by weight.
Overall Dimensions
Overall length 60"
Overall width 60"
Overall height 40"
Net weight 600 lbs.

MOTOR SPECIFICATIONS

1/2 HP 230/460 3/60 3450 RPM coolant pump motor
1/4 HP 208-230/440 3/60 1725 RPM drum rotation motor