1-3/8" VULCAN RINGMASTER TUBE CUTOFF MACHINE

Machine Capacity
.55 Sq. In. of area of mild steel
.8368 O.D. Maximum solid rod
9 In. maximum cut-off length
Tube O.D./ Max Wall 1-3/8"/.130
Cycle Speed
Actual cycle speed of machine will vary with tube wall thickness
and length of cut.
Cut Length/Recommended Cutting Speed Est.Pieces per Hour/
Number set on Ejector
Counter
1"/90 (CPM) 5400/16
2"/78 4680/8
3"/66 3960/5
4"/54 3240/3
5"/42 2520/2
6"/30 1800/1
9"/15 900/1
Cutting speeds depend upon wall thickness and the cut length,
and will vary from 20 to 112 pieces per minute
Semi-automatic
Absoutely without stock loss between cut pieces
Cuts lengths from 2-1/2 times wall thickness to 6" on
1-3/8" machine
Cut length tolerances in thousandths
Diameters from 1/4" up to 1-3/8" and 1/2" up to 2" O.D.
Commercially burr-free, little or no distortion
Accepts straight tube or coil stock
Cuts shapes and solids as well as round tube
Complete tool change-over in approximately 45 minutes
Cuts all commercial grades of ferrous and non-ferrous metals
Width 46"
Height 59"
Work height 45"
Length-tube cutter 6'4"
Length-cutter & loader 27'9"
Width- cutter & magazine loader 60"
Tube length 20'
Tube diameters 1/4-1-3/8"
Weight (approx.) 2,800 Lbs.