GIDDINGS & LEWIS WINSLOMATIC MODEL 100C DRILL POINT GRINDER

Capacity - Accommodates all drill sizes 1/32" through 1-1/2"
Grinding Wheel - 20" diameter x 12" hole x 1/2" face for drills up to 1/2"
diameter; 20"
diameter x 12" hole x 1" face for drills larger than 1/2" diameter.
Grinding Wheel Spindle - Mounted in heavy, self-aligning, adjustable babbit
t bearings.
Lubricated by circulating, low-pressure hydraulic oil.
Grinding Wheel Dresser - Manual and automatic self-compensating tracer type
. Dresser
is hydraulic operated. When wheel is consumed, machine will not cycle.
Wheel dresser Cams and Holder - Separate wheel dressing cams provide for al
l basic
point angles. Fine adjustments are possible by a total of 10 degree adju
stment of cam holder.
Warning Light - Red warning light indicates when grinding wheel is consumed
.
Grind Spark Out - A selector counter allows from 1 to 400 sparkout passes o
n each drill
point after the infeed is completed.
Re-Cycling Time (Pace Setter) - Provided for semi-automatic usage, allowing
up to 6
seconds, in increments of 1/10 second, for loading before the machine sta
rts another cycle.
Infeed Selector Control - Allows six positions for stock removal from point
of drill up to
.030"
Wheel Dresser Selector - Drill pointing cycles per dressing may be pre-sele
cted from 1 to 400
Production rates of 300 - 500 drills per hour
Overall dimensions (machine only) 53"W x 48"D x
48"H
Weight (est.) 3,100 lbs.

MOTOR SPECIFICATIONS

Electric Motors - Grinding wheel spindle motor 2 HP, 3-phase. Hydraulic pu
mp motor
1-1/2 HP, 3-phase. Coolant pump motor 1/2 HP, 110 volt, 1-phase. Fan for
hydraulic oil
coolant
1/70 HP, 110 volt, 1-phase.
2 HP A/C grinding wheel motor
1-1/2 HP A/C hydraulic system motor
1/2 HP A/C coolant system motor