HAUSER MODEL S-40 ULTRA PRECISION CNC JIG GRINDER

Capacity
Range of adjustment X and Y 25 1/2 X 18"
Vertical adjustment of the grinding head (W) 19 1/2"
Stroke length (Z), infinitely adjustable, up to 5 1/2"
with DC-drive (option) up to 4 3/4"
Grinding length (with grinding arbor) 4 3/4"
Clearance between grinding motor (45S) and table 0-23 1/2"
Clearance between columns 29 1/2"
Radial fine feed range (U) up to 15/64"
Diameter ground with dia. 100mm wheel and
extension plate, max. 14"
Taper grinding, included angle, max. 16 Deg.
Table
Working surface 30 5/16 X 24 1
3/16"
Permissible load, max. 1103 kg.
Feeds
Table and saddle ( X and Y )
DC- drive ( DR version ) 5/64-59 (in/mi
n.)
Servo-controlled DC-drive (111 version)
Machining speed 0-59 (in/min.)
Traversing speed 118 (in/min.)
Vertical adjustment of grinding head (W), approx. 31 1/2 (in/min
.)
Grinding spindle
Diameter of spindle sleeve 3 15/16"
Grinding spindle speeds
Motors, infinitely adjustable 4500-80,000 Mi
n-1
Turbines, adjustable to 100,000 and
160,000 Min-1
Planetary speed (C), infinitely adjustable 5-250 Min-1
Stroke speed (Z), alternating stroke movement
infinitely adjustable 5/8-295 (in/mi
n.)
Fine feed in the Z-Axis, DC-drive (option)
infinitely adjustable approx. .02-5 7/8 (in/
min.)
Measuring systems
Axes X and Y
Linear Inductosyn, display switchable inch resolution .00005"
Z-Axis Depth stop, reading on dividing drum .0005"
Gauge-block measuring system (accessory)
reading on dial indicator .0005"
Linear Inductosyn (option), switchable mm/in. resolution .00005"
Positioning accuracy
DR version .00012"
111 version .00016"
Installation requirements
Installed power
DR version 7 Kw
111 version 8 Kw
Tolerance on supply voltage 10 +/- %
Air requirement (suction capacity of compressor)
DR version, approx. 530 Ft3/h
111 version, approx. 636 ft3/h
Necessary mains pressure 5 Bar
Admissible mains pressure, max 7 Bar
Weight
Machine, net 8,800 Lbs.