24" CINCINNATI BICKFORD BOX TYPE UPRIGHT DRILL

Capacity swing
Center of spindle to front of lower column 12-1/2"
Center of spindle to face of upper column 11-1/2"
Measured on plane of table 11-1/4"
Maximum distance from spindle to finished surface of base 3'to 9-5/8"
Minimum distance spindle to finshed surface of base 17"
Maximum distance from spindle to table 2'to 8-3/4"
Minimum distance floor to table top table in lowest position 19-1/8"
Vertical adjustment of table 10-3/4"
Vertical adjustment of sliding head 17-1/2"
Vertical travel of spindle by power feed 10-1/2"
Vertical travel of spindle by hand feed 11-1/8"
Working surface of table 19" x 24"
Standard feeds furnished (thousandths per revolution) 5,7,9,11,15
20,25,34 & 4
3
Standard speeds (12) with 1200 RPM motor 60 to 1,000
RPM
Spindle nose No. 4 Morse
taper
Overall dimensions 26" x 62" x
9'1"High
Approximate weight 2,650 Lbs.

MOTOR SPECIFICATIONS

5 HP A/C Motor