BOHLE INGERSOLL 6 AXIS CNC HORIZONTAL MACHINING CENTER

Allen Bradley 7320 CNC controls, tape reader, RS232
HPM (High Precision Machine Co.) 30" Precision tilting rotary table
Model 360KR/105K-30-C6-1-S-OC-OCB, Serial Number 552059, New 1991

Cont'd
30" Diameter Tilt and Rotary Feed Table
Specifications
360 Deg. Rotary
Axial runout at edge .0005 Deg.
Radial runout of bushing .0005 Deg.
Bearing Load Capacities
Static axial 210,000 Lbs.
Static radial 56,000 Lbs.
Static moment 941,000" Lbs.
Dynamic axial 31,600 Lbs.
Dynamic radial 22,000 Lbs.
Dynamic movement 162,100" Lbs.
Note tilt ratings exceed ratings for rotary axis, dynamic ratings
assume above loads applied continuously for 12,000 hours at 6 R.P.M.
Lesser duty cycle requirement will increase life or increase allowable loa
ds
Accuracy
Intersection of rotary and tilt centerlines .001"
Axial runout of tilt axis along tilt centerline .001"
Radial runout of tilt axis about tilt centerline .001"
Bushing diameter 1.5003/1.5007 (STD)
Configuration
360 Deg. Rotary
Motor continuous torque 220" Lbs.
Continuous output torque 30,000" Lbs.
Motor/output ratio 2821
Maximum R.P.M. 6
Position accuracy +/- 5 Sec.
Position feedback 12" 720 pole
inductosyn
Holding torque with optional clamps (@1200PSI) 48,000" Lbs.

Page 3 of 3

Cont'd
30" Diameter Tilt and Rotary Feed Table 120 Deg. Tilt
Table size 30 1/4" x 66 1/4"
Motor continuous torque 300" Lbs.
Continuous output torque 90,000" Lbs.
Motor/output ratio 8751
Maximum R.P.M. 1.5
Position accuracy +/- 5 Sec.
Position feedback 12" 720 pole
inductosyn
Holding torque with optional clamps (@ 1200 P.S.I.) 64,000" Lbs.
20 Position automatic tool changer
Coolant system
Way covers
Chip conveyor