PRODUCTION MODEL 101 DUAL HEAD TUBE GRINDER/POLISHER

GENERAL SPECIFICATIONS:

Number of heads Two
Minimum O.D. .750"
Maximum O.D. 6.00"
Voltage 440 VAC
This machine is designed to use abrasive belts to apply a polished finish
to round tubular
products.
The tube is driven through the machine by leather or rubber belts that ar
e held in tension by two
rollers. The upper roller is rotated by a 1 HP US Motors Vari-Drive motor
and gearbox
integrated system. A dial on the system allows the operator to manually
adjust the speed of the
drive belt, and thus the speed of the tube through the polisher.
The abrasive belt is rotated by a urethane coated roll which is driven by
a 10 HP motor via a set
of pulleys and belts.
The belt is held in tension by a steel roll that is mounted on the end of
the air cylinder. This
roll is adjustable at an angle to facilitate belt tracking. Air regulato
rs are provided for tension
adjustment.
The machine has two stations as described above.
An electrical cabinet with all electrical components and main disconnect
is supplied. Ammeters
are supplied to monitor the amperage of the motors driving the abrasive b
elts.
Twenty foot long height adjustable inlet and outlet tables are supplied.
These tables have nylon
coated rolls.
There are two of these machines available.
Dust collection is accomplished by a cyclone type dust collector driven b
y a 10 HP motor. Both
units share one dust collector. Manifold piping to connect the polishing
units to the dust collector
is provided.