15" X 40" HARRISON M-350 TOOLROOM ENGINE LATHE

Centers
Height 7.5"
Admits between 40"
Swing
Over bed 15"
Over cross slide 9.5"
Spindle
Bore to pass 2.125"
Nose D1-6 Camlock
Morse taper in nose bush No.4
Number of speeds 12
Range of speeds 40-2200 RPM
Motor
1800 RPM @ 60 Hz Elec.5.5 KW (7.5 HP)
Leadscrew
Diameter 1.26"
Thread 4 TPI
Threads
Metric pitches (51) From 0.2 to 14mm Engli
sh pitches (56)From 2 to 56 TPI
Module pitches (20) From 0.2 to 3.5 Mod
Diametral pitches (20) From 8 to 56 DP
Feeds
Metric (31) .018 to 1.2mm/rev
English (31) .0007 to .048 in/rev
Cross feeds half longitudinal values
Bed
Width over ways 11.8"
Depth under head6"
Depth under saddle 10.6"
Cross slide width 7.1"
Cross slide travel 8.8"
Top slide width 4.1"
Top slide travel 4.7"
Max. tool section .75" x 1"
Tailstock
Quill diameter 2.48"
Quill travel 5.5"
Quill morse taper No. 4
Set-over +/- .5"
Weight
40" crs 2759 lbs.
60" crs 3088 lbs.
Standard equipment
Single toolpost Chuck guard
Instruction & spare parts manual Work driver plate
Spanners, keys, and oil gun Spindle centre bush
2 No.4 MT centres Accuracy chart
Full length rear splash guard
SHIPPING DATA GROSS WEIGHT PACKING CASE DIM.
40" crs 3318 lbs. 88-1/4" x 48" x 54-3/4"
60" crs 3870 lbs. 108" x 48" x 54-3/4"