SCM ROUTECH RECORD 220 CNC ROUTER

(CONT.)
Machining head carriage
The machining head has two independent movements, vertical and horizontal, t
o enable adjustment of
the head pitch and distance the work surface. The vertical movement of the
head carrier is CNC
controlled.
The machining head is mounted to THK roller bearing vertical slides for chat
ter free operation.
Technical Features
On/off pneumatic stroke of drilling head 60mm (2-1/4")
Work height from spindle nose to table top 320mm (12-1/2
")
On/off stroke of each spindle 60mm (2-1/4")
Worktable
The upper worktable is manufactured of aluminum and has 30mm spaced grooves
both lengthwise and
widthwise to accommodate rubber seals to vacuum clamp work pieces of any sha
pe. The threaded holes
(120mm pitch) are in a grid layout of the worktable enabling vacuum clamping
, anchoring of equipment,
and mechanical clamping systems. Vacuum cups (60mm & 120mm pods) can be ins
erted in the 120mm
pitched, threaded holes for workpiece clamping together with retractable (po
p-up) stops for referencing
to eliminate the need for spoilboards and templates.
Dimensions of Worktable
3120mm (122.8" left to right)
1200mm (47.25" front to back)
Vacuum System
The vacuum hold-down system consists of a high delivery, high head pressure
vacuum pump linked to
a worktable CNC controlled double vacuum circuits enabling som
muler machining with
two (2) independent vacuum zones per table.
*Electronic opening and closing of the vacuum circuits.
*Line filters for protection of the vacuum pump.
*Push button to actuate each vacuum zone.
* safety circuit that suspends the machine operation until the
operator engages the vacuum
system.
Page 3 of 4

(CONT.)
*Double vacuum meter provided to indicate vacuum pressure for the worktable.
*Input and output connections for pneumatic devices are placed along the fro
nt edge of the worktable.
These pneumatic connections are for automatic clamping device, pop-up refere
nce stops, etc. This unit
consists of CNC controlled pneumatic solenoid valves with quick coupling chu
cks for compressed air
lines.
Axis movement (X,Y, & Z axes)
Automatic lubrication of the ball screw assemblies and linear bearing blocks
are CNC controlled and
carried out according to recommended cycles in order to maintain lifelong pe
rformance and efficiency.
CNC controlled axis speed enables movement and cutting speed to be chosen ac
cording to working
requirements.
Max. vectorial speed 85 m/min
Max. rapid feed speed (X & Y) 60 m/min - (2
,362 in/min)
Max. rapid feed speed (z-axis) 30 m/min - (1
,181in/min)
X stroke 3250mm (128")
Y stroke 1550mm (61")
Z stroke 300mm (11.8")
Control Unit
NUM Model 1040 (PC Based), Multi-axis CNC control. THe NUM 1040 represents
a state of the art
fourth generation CNC control unit, supplied with an extra large memory capa
city enabling a large
number of programs to be resident in the control unit at all times. The NUM
1040 is extremely easy
to learn and use as the unit seeks out programming and assists the operator
in correcting the program,
along with a color graphic video terminal which allows a visual check of the
work piece program as well
as the cutting tool path.
Technical features
*1.2G Disc Drive
*Profile geometry programming
*16 megs of RAM memory
*10.5" color graphic video monitor
*Parametric programming
Page 4 of 4

(CONT.)
*Programmable angular offset
*Acceleration control
*139 available variables
*Programming from keyboard
*Windows Operating System
*Helical interpolation
*Programmable scale factor
*Programmable mirror image
*Tool compensation
The control is mounted in a separate control cabinet supplied with a filter
air cooling/circulation system.
NOTE APPROX. 1000 HOURS USE - "LIKE NEW"
NEW PRICE $160,000.00 +