ENSHU MODEL 650V CNC VERTICAL MACHINING CENTER

Travel amount
X axis (longitudinal stroke, table) 51.2" (1300mm)
Y axis (transverse stroke, saddle) 25.6" (650mm)
Z axis (vertical stroke, spindle head) 26" (660mm)
Distance from table top to spindle 7.9"-33.9"
(200-860mm)
Distance from column front to spindle center 27.6" (700mm)
Table
Table sixe for work area 63"x25.6"
(1600mm x 650mm)
Maximum allowable weight of work 4070lbs (1850kg)
Shape of table top surface 0.7" (18mm)T-slots x5
Spindle
Spindle speeds 20 - 6000 rpm
Spindle speed changes 2 Stages
Spindle nose taper 7/24 Taper No. 50
Spindle bearing diameter 3.9" (100mm)
Feed rate
Rapid feed rate 708.7"X x 708.7Y x
560.6"Z (18000 x
18000 x 15000mm)
Cutting feed rate 0.04"-196.9"/min
(1-5000mm/min)
Jog feed rate 0-157.5"/min
(21 stages)
(0-4000mm/min)
Automatic tool changer
Tool shank type MAS BT50
Pull stud type MAS P50T-1
(45degrees)
Magazine tool capacity 30 tools
Maximum tool diameter 4.9" (7.9mm) 125"
(200mm)
Maximum tool length 15.7" (400mm)
Maximum tool weight 33 lbs (15kg)
Tool section method Shortcut random
Tool exchange time (tool-to-tool) 2.5s
Tool exchange time (tip-to-tip) 8.8s

MOTOR SPECIFICATIONS

Drive motors
Spindle drive motor AC
20HP(15kW)(30min)/
15HP (11kW)
(continuous)
Axis feed motors X,Y,Z AC 4.7HP
(3.5kW)
Hydraulic pump motor 2.2kW
Lubrication pump motor 90 W
Cutting fluid motor 0.25kW
ATC arm motor 0.4kW
Floor space 178.3" R to L,
164.4 F to B,
118.9" High
Approximate weight 28,600 lbs