ENSHU MODEL DT-CL CNC VERTICAL DRILLING & TAPPING CENTER

Travel Amount
X Axis (transverse stroke, column) 19.7"
Y Axis (longitudinal stroke, saddle) 15.7+8.3" (ATC)
Z Axis (vertical stroke, spindle head) 11.8+3.1" (ATC)
Distance from table top to spindle 7.9" - 19.7"
Table
Table size for work area 27.6" x 15.7"
Maximum allowable weight of work 1,100 lbs
Shape of table top surface 0.6 " T-slots x 3
Spindle
Spindle speeds 120 - 10000 RPM
Spindle speed changes One step
Spindle nose taper 7/24 taper no. 30
Spindle bearing diameter 2"
Feed Rate
Rapid feed rate 1417.3" x 1417>3" x
1417.3"/min
Cutting feed rate 0.04" - 196.6"/min
Jog feed rate 0 - 157.5"/min (16 step
s)
Automatic Tool Changer
Tool shank type MAS BT30
Pull stud type MAS P30T-1 (45deg.)
Magazine toole capacity 12 tools
Maximum tool diameter 3.1"
Maximum tool length 7.9"
Maximum tool weight 6.6lbs(total weight 44l
bs)
Tool selection method Absolute address short
access
Tool exchange time (tool-to-tool) 3.1 seconds
Tool exchange time (chip-to-chip) 4.5 seconds
CONT
Drive motors
Spindle drive motor High-speed coil (H)
AC7.5kw (30min.rating)/
3.7kw(continuous rating
)
Low-speed coil (L)
AC5.5kw(20min.rating)/
3.7kw(50min.rating)
Axis feed motor X,Y AC0.85kw
ZAC1.3kw
Cutting fluid motor 0.18kw
ATC arm motor 0.09kw
Power Consumption
Power supply 200/220VAC +-10%,
50/60Hz +-2%, 19kVA
Air pressure supply 0.4 - 0.8MPa (4-
8kgf/cm) 1500L/min
(atmospheric)
Tank Capacity
Cutting fluid tank capacity 26.4 gal.
Overall Dimensions (est) 53.1"L x 108.7"W x
103"H
Weight incl. NC device (est) 7,700 lbs