K.O.LEE MODEL B2062HB TOOL & CUTTER GRINDER WITH HEAVY

Distance between tailstocks 32"
Distance between centers in workhead and tailstock 26"
Distance between collet in workhead and tailstock 27"
Distance between B946 chuck face and tailstock (1" hole through chuck)25-
1/2"
Table working surface 5-1/4" x 37-1/
4"
Sub table 8" x 46"
Total crossfeed movement 7-1/4"
feed per revolution of handwheel (.001 grad.) .100"
Table traverse 20"
Fast feed per revolution of handwheel 2-13/16"
Slow feed per revolution of handwheel 9/16"
Ratio-fastslow 51
Vertical movement of column 7"
Feed per revolution of handwheel (.001 grad.) .050"
Column diameter 4"
Swing over table (1" & 2" raising blocks available) 8-1/4"
Minimum distance centerline of wheel shaft to top of table 3-3/4"
Maximum distance centerline of wheel shaft to top of table 10-3/4"
Maximum distance from column to outside of straight wheel;
dovetail slide not extended, spindle 90 deg. to table 4-1/2"
Maximum distance from column to outside of straight wheel;
dovetail slide extended, spindle 90 deg. to table 10-11/16"
Centerline height of fixtures to top of table 4.130"
Table t-slot 7/16"
Table swivels (calibrations 3" per ft., 15 deg. either
side of center) 225 deg.
Wheel head swivel 360 deg.
Motor speed RPM 3450
Spindle speed range (heavy duty grinders) 1150-7760
Maximum I.D. depth hole size 9/32" to 2"
capacity with standard arbors 2-3/4"
Maximum crossfeed surface grinding
Heavy duty grinders (8" wheel) 4-1/4"
With S1055CR quill (7" wheel) 5-3/4"
Longitudinal power feeds 3/4 - 20 fpm
Grinding wheel hole size 1-1/4"
Net weight 1180 lbs.

MOTOR SPECIFICATIONS

1/2 HP grinding spindle motor
1/2 HP hydraulic pump motor