SAEILO MAGNUM 75V 3-AXIS VERTICAL MACHINING CENTER

Cross travel (x-axis) 67"
Longitudinal travel (y-axis) 29.6"
Vertical travel 25.6"
Spindle nose to table surface 5.9"- 31.5"
Spindle center to column 30.7"
Table height from floor 32.7"
Table center to column 15.9" - 45.5"
Table dimensions 71" x 27.6"
Maximum table load 3,740 lbs.
Maximum spindle speed 3500 rpm
Spindle motor (alpha series) Fanuc model 8
Spindle drive system 2 speed gear
Spindle taper NT No.50
Front spindle inside bearing diameter 3.94"(100mm)
Bearing system (4) angular contact
bearings
Spindle torque (30 min. rating) 382 Nm
282 ft. lbs.
Spindle orientation Pulse coder
Spindle motor 15/11 hp
(30 min rating/continuous) (11/7.5 kw)
Rapid traverse (x) 591 ipm
Rapid traverse (y,z) 472 ipm
Cutting feedrate (x,y,z) 0.04 - 394 ipm
Jog feed (x,y,z) 0.008 - 394 ipm
Minimum increment (x,y,z) 0.0001" (.001 mm)
Tool shank orientation CAT 50
Pull studs P-50
Number of tools 24
Tool selection system Random, bi-directional
Tool change time 4 sec.
Chip to chip time 7 sec.
Max. tool weight 33 lbs.
Max. tool diameter x length 5.9" x 13.8"
Max. tool diameter (w/o adjacent tool) 7.88"
(cont'd)
Feed motors X-axis,Y-axis,& Z-axis AC-20 3.8hp (2.8kw)
Ball screw diameter 1.97" (50mm)
Guideway system Box ways
Guideway width (X,Y,Z) 4.33", 6.30", 4.33"
Distance between guideways (X,Y,Z) 23.62", 31.52", 20.9"
Input power 21.5 kVA, AC 208V
+/-10%,3 phase,60 Hz
Air requirement 85 psi (6 kgf/cm sq.)
Hydraulic tank 28.53 gal. (108 liters)
Lubrication oil reservoir 1.05 gal. (4 liters)
Coolant tank 38.04 gal.(144 liters)
Machine height 118.1"
Floor area 156" x 162"
Footprint 155 sq.ft.
Machine net weight 27,500 lbs.
Machine gross weight 31,966 lbs.

MOTOR SPECIFICATIONS

Hydraulic pump motor 2 hp (1.49kw)
Coolant pump motor 1.11 hp (0.83kw)
Chip conveyor motor 0.125 hp (.09kw)
Lubrication motor 0.125 hp (.09kw)