HARDINGE CONQUEST T42 PRECISION CNC SLANT BED LATHE WITH

Spindle
Spindle configuration (ANSI) A2-5", 16C
Round collet (through capacity) 1.625"
AC Digital Drive System
Standard 10 HP
Torque rating 51.5 ft-lb
Speed range (1-RPM steps) 50 - 5000 RPM
Carriage and Cross Slide
Swing diameter over upper way cover 21.2"
Preloaded ball screw diameter 1.259"
X-axis travel (max) 5.31"
X-axis rapid traverse rate 472 IPM
Z-axis rapid traverse rate 630 IPM
Z-axis (drilling) thrust (max) 1500 lbs.
Vertical Thrust
No. of positions 12
Max. square shank tool size 3/4"
Max. round shank tool size 1-1/4"
Max. distance from spindle face to turret face 14"
Turret indexing time (next station) .77 seconds
Turret indexing time (furthest station) 1.24 seconds
Turret indexing accuracy +/-1 arc sec.
Max. turning diameter with std. qualified
3/4" square shank tool (1" head) 9.5"
Sub-spindle
Spindle configuration (ANSI) A2-5"
Hole thru spindle 1.89"
Round 16C collet (thru capacity) 1.625"
16C step chuck (gripping capacity) 6"
5-1/2" power jaw chuck (rec. gripping capacity) 5"
Hydraulic collet closer stroke .5"
Max. draw bar pull 3000 lbs.
Max. allowable weight on spindle (incl.
workholding device) 75 lbs.
Max. distance from spindle face to spindle face 13.270"
Max. square shank tool size on vertical turret 3/4"
Max. round shank tool size on vertical turret 3/4"
Max. allowable weight on spindle (incl.
workholding device) 75 lbs.
Max. distance from spindle face to spindle face 13.270"
Max. square shank tool size on vertical turret 3/4"
Max. round shank tool size on vertical turret 3/4"
AC drive system (30 min rating) 5 HP
Torque rating @ 1500 RPM base speed 17.5 ft-lb
Speed range (1 RPM steps) 80 to 6000 RPM
Electrics 220 volts,3 PH,60
CYC