EMCO MAIER EMCOTURN 345 2-AXIS CNC LATHE TURNING CENTER

Work Area
Swing over bed 430mm(16.9")
Swing over cross slide 210mm(8.3")
Center distance 600mm(23.6")
Max. turning diameter 220mm(8.7")
Max. working length 510mm(20.1")
Max. bar diameter 45mm(1.75")
Travel
Travel in X 160mm(6.3")
Travel in Z 310/510mm
(12.2"/20.1")
Spindle
Speed range 0-6000 RPM
Torque at spindle 78Nm (58 Ft/lbs)
Spindle nose DIN 55026 A2-5
Spindle bearing (inside diameter) 80mm(3.1")
Spindle bore 53mm(2.1")
Main Drive
Power 15 HP
Tool Turret
Number of tool stations 8
Shank VDI (DIN 69880) (Quick change tool shank) VDI 30
Tool Cross-section 20x20mm (0.8"x0.8
")
Shank diameter of boring bars 32mm 91.3")
Turret indexing speed 0,2 Sec.
Feed Drives
Rapid traverse rate in X/Z 20/24m/min
(787/945IPM)
Feed force in X 4000 N (899 lbs)
Feed force in Z 6000N (1349 lbs)
Accelerationtime 0,2 Sec.
Position scatter Ps (to VDI 3441) X/Z 0,0030,005mm
(0.00012/0.00020"
)
Standard Tailstock
Quill diameter 60mm (2.4")
Quill travel 120mm (4.7")
Quill Bore taper MT4
Quill Thrust 5000N (1124 lbs)
Cont. on

(cont.)
Automatic tailstock
Tailstock travel 510mm(20.1")
Max. thrust 6000N (1349 lbs)
Travel speed Approx. 20m/min -
(800 IPM)
Tailstock bore taper MT4
Coolant System
Reservoir capacity 250Liter (65 Gal)
Pump power 0,57/2,2kW
(0.8/3.0HP)
Power Ratings
Electrical power supply 17 kVA
Compressed air 6 Bar (87 PSI)
Machine Dimensions 88.6"x77.0"x76.4"
H
Machine weigth (Approx) 5,700 Lbs