SOUTHWESTERN INDUSTRIES MODEL TRAK DPM V3 2/3-AXIS CNC

GENERAL SPECIFICATIONS:

Table size 50" x 10"
T-slots (number x width x pitch) 3 x .63" x 2.48"
Travel (X,Y,Z Axis) 31" x 17" x 21"
Quill diameter 4.13"
Spindle taper #40
Spindle speed range RPM 200-5000
Spindle center to column of face 19.2"
Spindle motor power 5 HP
Power requirement 50 Hz/60 Hz;3 Pha
se;
220V; 30 FLA
Machine net weight 4070 LBS
Max. weight on table 1320 LBS
Height of tagle from bottom of bed 38"
Max. spindle nose to table 21"
Min. table height 85"
Max. table height 100"
Width of machine including table 73"
Length of electric box door closed 76"
Overall width including full table traverse 104"
Overall length with electrical table 100"
Footprint (width x depth) 24" x 44"
Way surface - dovetail x axis, sqyare ways Y & Z axis
Weight (approx.) net 4100 LBS
Weight (approx.) shipping 4400 LBS
Pallet size 6' x 6'
Maximum work capacities-drilling (mild steel) max. dia. 100"
Tapping 5/8"
Milling capacities 5 inch 3/min.
Way surfaces hardened and ground
Turcite coating on all slide ways
Automatic lubricating pump
Quill diameter 4.13"
ProtoTRAK VM CNC - The Control on the TRAK V Series Bed Mills Hardware
Two ot three CNC, three-axis DRO
Pentium Processor with built-in video and ethernet cards
32 MB or RAM with expansion slots available
Cont. on
GENERAL SPECIFICATIONS:

Hard drive
TEAC floppy disk drive
Ports and connectors P/S 2 keyborad and mouse, RS232, RJ45
10.4" Color active-matrix display
Override of programmed feedrate and rapid with graphical indicator
Polycarbonate sealed membrane with LED status lights
Gasket sealed enclosures
Brushless A.C. servomotors rated at 704 in/oz continuous torque
Integrated motor encoders with .000025" underlying resolution
250 IPM rapid traverse
Precision ground ballscrews in the table, saddle, and column
Programmable spindle speed
Override of programmed spindle speed with graphical indicator
Electronic handwheels
Yaskawa AC spindle drive
Digital servo amplifiers custom designed for mill operation
Auxiliary functions spray mist, coolant, spindle off and an input to a pr
ogrammable
rotary table of indexer
Tapping with a floating tapping head
SOFTWARE SPECIFICATIONS
Windows operating sytem with access to windows desktop
Versatile select between manual, two or three axis CNC
Auto geometry engine
Two or three axis circular interpolation
Linear interpolation
Six modes of operation
Color graphics with adjustable views
Icon-prompted tool set-up
Automatic diameter cutter compensation
Tool length offsets with modifiers
Advanced diagnostic routines
Jog and power feed in DRO mode
Selectable fine/course manual traverse
Go to - traverse stops at dimension selected
Automatic return to absolute zero
Incremental and absolute position readout
Teach-in of manual moves
Inch/mm selectable
Scaling of print data
Cont. on page 3
Page 3 of 3
SOFTWARE SPECIFICATIONS
Alpha-numeric program names
Event comments
Selectable tool path or part geometry programming
Convenient canned cycles for all geometry
Circular, rectangular or irregular pockets, islands and profiles
Helix and thread milling routines
Repeat of programmed events
LOOK-Program graphics with a single button push
List step - Graphics with programmed events displayed
Conrad - One input for automatic corner radius
Incremental and absolute programming
Subroutine and copy of programmed events
Mirror with selectable cutting order
Rotate
Program diagnostics
CAD/CAM interfae
Math helps with prompted graphical interface
Tool stepover adjustable for pocket routines
Selectable ramp or plunge cutter entru
Spreadsheet editing
Global data change
Clipboard to copy events between programs
Trial run
TRAKing-Manual control or CNC program run
Real time run graphics with tool icon
Access to networked drives
Automatic file back-up routines
AVAILABLE OPTIONS/ACCESSORIES
Glass scales for table and saddle
Power drawbar
Remote stop/go switch
Halogen work lamp