26" X 72" CINCINNATI HYDRASHAFT TOOLROOM ENGINE LATHE

Capacity
Swing over bed 26 3/4"
Swing over cross slide 17 1/2"
Distance between centers, (max. turning length) 72"
Headstock
Spindle speeds 12
Spindle speed range, standard (40 to 1 ratio) 16 to 640 RPM
Spindle speed reverse Electrical
Spindle nose- standard long taper key drive L-2
Spindle diameter of hole thru - L series only 2 5/16
Spindle size of center #5 Morse
Bed
Width 18 7/8"
Depth 14 11/16"
Thread and Feed Range
Number of thread and feed changes 54
Range of thread per inch,low, standard and
high speed ranges 1 1/2" to 92"
Range of feeds - carriage, low, standard and
high speed ranges .0019 to .1215 IP
R
Range of feeds - cross slide, low, standard and
high speed ranges .0009 to .0578 IP
R
Leadscrew (Acme) diamter in inches and threads per inch 1 5/8 - 4"
Cont. on

(cont.)
Carriage and Compound Test
Cross slide travel 16 3/4"
Top slide travel 4 1/2"
Tool holders-size of tool shank 3/4" x 1 5/8"(#3)
Tailstock
Spindle travel 6"
Spindle diameter 2 3/4"
Spindle-size of center #5 Morse
Taper Attachment
Max. taper per foot 4 1/2"
Max. turning length at one setting 20"
Max. included angle 20 deg.
Misc.
Steady rest, standard capacity-min. and max.
diameter 1/2 to 8
Drive Motor
Motor-standard, high or super high spindle speed range 10 HP
Net weight (approx.) 7,500 LBS