(2) TSUGAMI BU26-SY CNC SWISS TYPE PRECISION TURNING CENTER

Machining Range
Stock diameter 1.023"/1.500"
Max. machining length 9.8"
Max. drilling dia. .63" in 1045 Stee
l
Max. tapping size 1/2" in 1045 Stee
l
Main Spindle
Number of spindles 1
Spindle speed 60 to 6,000 RPM /
60
to 5,000 RPM
Motor output 7.5/11 kW(10/14.7
HP)
Cutting torque 35 N-m
Spindle indexing .01 Degrees
Chuck type Collet chuck
(Draw/Toggle Type
)
Turret
Number of turrets (1) 8 Station tur
ret, (1)
7 Station gang to
ol
slide
Number of mountable plane 8 Surfaces on tur
ret, 3
Tool locations pe
r
surface, 7 Pos. o
n gang
slide
Indexing time T1 0.2 sec/pos.
T2 0.3
sec/pos.
Idle time (chip to chip) T1 0 to 1.5 sec
T2 0
to 1.7 sec.
Indexing method Servomotor
Max. speed of drive axis T2 Turret 5,400 R
PM
Cont. on

Back Spindle
Spindle speed 3.7/5.5 kW (5/7.5
HP)
Motor output 14 N-m
Cutting torque 5 Deg. (72 Div.)
Spindle indexing (Op.)
Chuck type Collet chuck (pus
h
with toggle type)
Feed
Stroke
X1, X2 3.15"
Z1 9.8"
Z2 5.51"
Y(T2 turret) 3.15"(Y&SY models
)
Z3 11.22"
Rapid traverse
X1, Z1, Z2, Z3 787 IPM
X2 472 IPM
Y 394 IPM
Size
Width x Depth x Height 139 x 81 x 70"
Net weight 11,500 LBS
Height of Sp. Center 1,000mm (39.37")