15" X 50" CLAUSING COLCHESTER MODEL 2000L 2-AXIS CNC LATHE

Capacity
Swing over bed 15.7"
Swing over cross slide 9.7"
Swing in gap 23"
Gap width in front of faceplate 6.5"
Spindle center height from floor 42.7"
Distance between centers 50"
Width of cross slide 7"
Type of cross slide ways Dovetail
Bed width 12.5"
Depth of bed 15"
Type of bed ways V and flat ways
Coolant tank capacity 20 Gallons
Spindle nose D1-6
Spindle front bearing ID 3.685"
Spindle taper 4MT
Spindle bore 2.125"
Speed ranges automatically selected 3
Spindle speed - low range 15-300 RPM
Spindle speed - medium range 35-860 RPM
Spindle speed - high range 120-2700 RPM
Spindle drive Variable AC
Spindle motor (30 min/Continuous) 10/7.5 HP
Minimum spindle speed for full power 70 RPM
Power consumption 22 KVA
Cross slide travel (X-Axis) 9.5"
Cont. on

(cont.)
X-Axis rapid traverse 315"/Min.
X-Axis feed rate .0012"-236"/Rev.
X-Axis ballscrew 20 x 4mm
Saddle travel (Z-Axis) 45.5"
Z-Axis rapid traverse 394"/Min.
Z-Axis feed rate .0012"-236"/Rev.
X-Axis ballscrew 32 x 6mm
Tailstock
Tailstock taper 4MT
Tailstock quill diameter 2.87"
Tailstock quill travel 5.5"
Quick change turret 8 Position

MOTOR SPECIFICATIONS

10 HP Spindle Motor