1" X 40" UNISIG KANSAI MODEL KSG-1000 CNC KNEE TYPE 3-AXIS

Controller
Model Fanuc OM Model C
Controlled axis 3-Axis - X,Y&Z
(2-Axis simultane
ous)
X & Y
Lowest input increment .0001"
Cont. on page 2
(cont.)
Spindle Drive
With a 4 HP A.C. motor with frequency converter. Speed adjustments
infinitely variable. Total range of adjustment 1200-6000 RPM
Knee Table
The machine features a heavy duty 2-axis table with anti-friction
bearings. Vertical and horizontal table movement by A.C. servo motors
through ballscrews. Positions for the X & Y are displayed on the
operator's panel CRT screen.
Drill Guide Housing
Special chip box housing with chip chute to direct chips toward the
rear of the machine. A pneumatic power bushing holder is located on
the front of the housing to provide clearance during workpiece
positioning and contact sealing while drilling.
Feed System
Drilling thrust is provided to the feed carriage by a precision ground
recirculating ballscrew. The ballscrew is driven by an A.C. servo motor
and provides infinitely variable feed to the tool. A.C. servo motors
offer these advantages
brushes
Electrical Equipment
Free-standing control panel with all required electrical components.
Machine functions are actuated and monitored thru a programmable
controller.
The Fanuc System Model OM-C is housed in a separate free-standing
cabinet adjacent to the machine. This is a 3-axis CNC, especially
designed for drilling machines.
Cont. on Page 3
(cont.)
The system OM-Model C includes all standard control features & the followi
ng additional
features
RS232 C interface
Inch/Metric conversion
Tool length offset
Manual pulse generator
Part program storage amd editing, Capacity 66' of tape info
The operator's panel includes the following functions
Control voltage ON and Off
Rapid traverse forward and reverse
Manual or automatic drilling cycle
Powered movement of knee table
Tool change position for gundrilling
Emergency stop
CRT display of X, Y and Z Axis
Spindle speed RPM read-out
Power ON
Cycle start
Including misc. gun drills