BROTHER MODEL TC-R2A CNC DRILLING & TAPPING CENTER

Travel Distance
X-Axis 480(700)mm
Y-Axis 360mm
Z-Axis 270mm
Distance from table top surface to spindle and face
Table work area 600x300(80xx320)m
m
Max. load weigth (uniform load) 150 kg.
Spinlde turning posotion time
Spinlde spee (min) 10-10,000
Spinlde speed when tapping (min) 6,000 Max.
Spindle taper hole 7/24 Taper No.30
Feed Rate
Rapid traverse rate (m/min) 36x36x50
Cutting feed rate (m/min)
X & Y Axis 1-10,000 RPM
Z Axis 1-20,000 RPM
ATC
Tool shank type MAS.BT30
Pull stud type MAS.P30T-2
Tool storeage capacity (pcs) 14
Max. tool length 200mm
Distance from taper gauge/max. diamter 30-150/D80 mm
160-200/D40 MM
Max. Tool weight (total weight 25) 3.0 kg.
Tool selection method Randaom short cut
Tool change time
Tool to tool 1.1
Chip to chip 1.8
Motor
Spindle motor (continuous for 30 min.) 7.3/5.0 & 8.4/3.6
5 KW
Feed axis motor 16,000 kw

(CONT.)
Power source
Power supply 0.72(X,Y),12(Z)
Capactiy (Max.0 (kva) 200 Vac+10% 50/60
Hz
Pressure (MPa) 9.0
Pneumatic source (flow rate L/min) 0.4-0.6
Machine Dimensions
Height 2,490mm
Installation are 1,617 x 2,658 mm
(when control box is open) 1,957 x 2,658 mm
Weight (including box and splash guard) 1,800 kg (1,850kg
)