6.3"/5.9" EISELLE MODEL PSU-450-VES COLD SAW WITH AUTOMATIC

Stock

Material feed unit with clamping jaws (raisable)
The minimum feed length for 90 deg. cuts in 39" the maximum length is 55.1
".
The multiple stroke feature allows 9 indexes.
Miter angle adjustment on the PSU 450 VES
This model has an automatic turn table. The turn table rotates automatica
lly in
coordination with the material feed cycle between two fixed stops which ca
n be set to the
desired angle. This automatic miter unit allows cutting of various angles
between 90 deg.
through 30 deg. on the left or right hand side.
The control unit
The PLC control is easy to operate with short programing procedures and co
ntrols the
working clycles of the machine centrally. when set to automatic mode, the
working cycles
are executed automatically.
Technical Data
Sawblade Diameter - max. 18.5"
Cutting Range Max.
Rectangles 90 deg 12.2" x 1.1"
Rectangles 45 deg 10.2" x 1.1"
Squares 90 deg 5.9"
Squares 45 deg 5.1"
Round 90 deg 6.3"
Round 45 deg 5.9"
Cutting speeds - Standard 48/96 SFM
Optional speeds 30/60/120/240 SFM
Main drive motor 3/60/460V HP
Feed rate/Sawblade Adj. 0/33 In/Min
Return speed of sawblade 177 In/Min
Cont. on

Technical Data (Cont.)
Turn table rotation to both sides deg 30-90-30
Rotation in automatic mode deg To fixed stop
(On VES - 30 Left/30 Right)
Single stroke of feed unit 55.1"
Multiple stroke 55.1" x 9"
Feed unit speed/forward 9.8" in/Sec.
Feed unit speed/return 9.8" in/Sec.
Weight (Approx) 5,179 Lbs.
Dimensions (LxWxH) 115"x53"x81"