HANSFORD MODEL 1018 DIE HANDLER / FLIPPER

GENERAL SPECIFICATIONS:

Shut height (minimum distance between platens) 6"
Open height (maximum distance between platens) 20"
Platen areas
Lower 17" x 26" Long
Upper (adjustable mounting plates)
Mounting of dies
Lower .6 - T-Slots 17" Long for 1/2" Bolts
Upper ..4 - Slots 5 1/2" Long for 1/2" Bolts
Movement of upper platen
Vertical travel 14"
Vertical crank 37.5 Turns/Inch
Vertical motor 15.1 Inches per M
inute
Rotary crank 30 Turns for 360
Deg.
Motor 1/4 HP, 110 Volt,
Single Phase, 60
Cycle,
Instantaneously
reversing
Extension cord 16'
Capacity (maximum die weight recommended) 400 LBS
Locking position of upper platen 0 Deg.
Maximum die try-out force recommended 1 Ton
Net weight 525 LBS
Shipping weight 600 LBS