SOUTHWESTERN INDUSTRIES TRAK DPM S3 2/3 AXIS CNC BED TYPE

GENERAL SPECIFICATIONS:

Table size 50" x 10"
T-Slots 3 x .63" x 2.48"
Travel (X,Y,Z) 30" x 17" x 23.5"
Max. quill travel 5"
Quill diameter 3 15/16"
Spindle taper NST 40
Spindle speed range 70-4200 RPM
Spindle center to column face 19"
Spindle motor 3 HP
Power requirements control 110V; 1P; 10A
Power requirements machine 220/440V; 3P;
8.5/4.25A
Max. weight on table 1320 LBS
Height of table from bottom of bed 38"
Max. spindle nose to table 23.5"
Min. height 85"
Max. height 95"
Width of machine including table 73"
Length with electric box door closed 76"
Overall width including full table traverse 108"
Overall length with electrical door open 70"
Footprint of machine 24" x 44"
Weight net / shipping LBS 4100/4400
Max. work capacities in mild steel
Drilling 1" Dia.
Tapping 3/4"
Milling 3 in3 / Min.
Max. rapid feed 150 IPM
Wide way surfaces are hardened and ground
Slide ways Turcite coated
Precision ground ballscrews installed in the table, ram and column
Solid ram moves up and down for Z-Axis operation, providing mass for heavy
cuts
Real handwheels so you can work manually
Cont. on
GENERAL SPECIFICATIONS:
(cont.)
HARDWARE SPECIFICATIONS
Two or three axis CNC, three axis DRO
Pentium processor with built-in video and Ethernet cards
32 MB or Ram with expansion slots available
Flash drive
TEAC floppy disk drive
Ports and connectors P/S 2 Keyboard and mouse, RS232, RJ45
10.4" Color active-matrix display
Override of programmed feedrate and rapid with graphical indicator
Polycarbonate sealed membrane with LED status lights
Gasket sealed enclosures
Servo motors - 560 in-oz torque
Integrated ram and wuill encoders
SOFTWARE SPECIFICATIONS
Windows operating system, SMX CNC Control
Selectable two or three axis CNC
Auto geometry engine
Automatic diameter cutter compensation
Two or three axis circular interpolation
Rotate
Look-Program graphics witn a single button push
Linear interpolation
Six modes of operation
Color graphics with adjustable views
Tool length offset with modifiers
Advanced diagnostic routines
Jog and powerfeed in DRO mode
Automatic return to ABS zero
Incremental and absolute position readout
Inch/mm selectable
Teach-in of manual moves
Alpha-numeric program names
Scaling of print data
Event comments
Selectable tool path or part geometry programming
Cont. on page 3
Page 3 of 3
GENERAL SPECIFICATIONS:
(cont.)
Convenient canned cycles for all geometry
Circular, rectangular or irregular pockets, islands and profiles
Helix and thread milling routines
Subroutine and copy of programmed events
Mirror with selectable cutting order
List step-graphics with programmed events displayed
Conrad-One input for automatic corner radius
Incremental and absolute programming
Program diagnostics
CAD/CAM interface
Math helps with prompted, graphical interface
Tool stepover adjustable for pocket routines
Selectable ramp or plunge cutter entry
Spreadsheet editing
Global data change
Clipboard to copy events between programs
Trial run
Real time run graphics with tool icon
Access to networked drives
Automatic file back up routine
Program converters
AVAILABLE OPTIONS / ACCESSORIES
Glass scales
Remote stop/go switch
Power drawbar
Halogen worklamp
ADVANCED FEATURES
Network memory
Electronic traking handles
Coolant pump
Splash guards