11' X 32' ESAB AVENGER X-P2-4000 HEAVY DUTY GANTRY CNC TORCH

GENERAL SPECIFICATIONS:
3-Axis gantry with rack-and-pinion drives
Maximum table width 137"
Single station cross-cut 133"
Precision machined fabricated reinforced main beam
Precision linear rail cross beam guiding system
Welded, machined trucks with oversized wheel bearings
Machined mating surfaces for high stiffness and accuracy
Digital AC drive amplifiers for maintenance free operation
AC brushless motors for smooth, accurate motion
Precision heavy-duty gearboxes for accuracy and long life
Maximum machine speed 1400 IPM
Cross axis Powertrack hose & cable carriers
Designed for cutting table surface height of 26" for up to 8" thick materi
als
Overall machine width 203", Particular configurations may vary
NOTE The Avenger X model P2 will maintain a machine positioning accuracy
of
+/- 0.015" in both the "X" and "Y" axis over a 6' x 6' area. The ma
chine
repeatability in this area is +/-0.005". Each machine's performance
is
factory verified using a laser interferometer according to ISO 230-2
test code
for machine tools. These tolerances can only be met if the rails ar
e installed
and maintained per ESAB specifications.
32' Heavy Duty Floor Mounted Rail System Includes
- Machined "T" Rail System for accuracy and durability
- Rail axis power trak carrier system for 32' rail
- Effective travel length of 24'
Vision PC Windows Based Cutting Machine Controller
The vision PC is th most versatile and powerful cutting machine controller
available, It is easy to learn, easy to use and allows complete mastry of
any cutting operation.
Hardware features include a 10.4" color LCD, hard disk drive, 3.5" floppy
disk drive, 8 position joystick, hand-wheel, speed potentiometer and RS-23
2
port (must see fiber optics).
Cont. on page 2
GENERAL SPECIFICATIONS:L (cont.)
Software features include automatic accel/decel, contex sensitive
help, graphical editor, help on errors, kerf override, macro keys,
multi-tasking, on-screen nesting, plasma pre-stop, plate alignment,
power fail recovery, program parking, real-time graphics with zoom,
remnant nesting, shape library with variable lead-in/lead-out (65 shapes),
step & repeat.
Plasma control interface for ESAB plasma systems
High speed OMNI plasma torch station features include
- High-speed vertical lifter with 500 ipm vertical speed reduces cycle
time between parts
ESAB m3 600 amp precision plasma system with PT-36 torch high speed cutting,
precision cutting, production cutting and plasma marking capabilities all fr
om
the same torch, selectable on the fly.
- Provides "precision" cutting from 50 to 260 amps
- Provides "production" cutting from 50 to 600 amps
- Pierce up to 1.5" thick carbon steel at 400 amps oxygen plasma
- Cuts up to 2.5" thick carbon steel at 400 amps oxygen plasma
- Cuts up to 2" thick stainless steel or aluminum with 600 amp nitrogen p
lasma
- Cuts up to 3" thick stainless steel with 600 amp argon-hydrogen
- Cuts up to 6" thick stainless steel with 600 amp argon-hydrogen
Includes the Following
- EPP-600 power supply with 12 to 600 amp output
control through the vision CNC, allowing full process automation using
programmable cutting parameters (SDP files). It uses electronic propor
tional
flow control valves in a compact design with no gears or motors.
s mixing
- Patented PT-36 torch with torch leads
- WC-7C water cooler/recirculator
- Start-up consumable kit for the PT-36 torch, Including start-up supply
of
consumables for oxygen and nitrogen, Plasma cutting up to 600 amps, tor
ch
tools and tool box
Cont. on page 3
GENERAL SPECIFCATIONS (cont)
- Input bundle including 4/0 cables and all applicable hoses and cables
required with the system
Argon / Hydrogen input system for the Smart Flow II
- Adds hoses, filters and plumbing for H-35 gas
- Includes CNC software upgrade for H-35 cutting
- Includes SDP files for H-35 cutting
LED Volt Meter
Remote current control
Laser Light Projector for Plate Edge Location
NOTE 60 Hours Use Like New 180k Replacement