1/2" CAPACITY NOMURA NNC-P1053 CNC SWISS TYPE SCRE

Bar diameter round
Maximum1/2"
Minimum5/128"
Maximum headstock stroke (Z-axis)5" - One chucking
Feed rate (inch per revolution)0.00005 - 0.2835
Rapid traverse speed141.3 IPM
Spindle rotation250 - 8000 RPM
Vertical tools5 pcs, 3/8" sq.
Tool stroke (X-axis)5/16"
Rapid feed 22 IPM
Attachment tools
3 spindles (for drilling & threading)
Drill capacity15/64" diameter
Thread capacity (diameter x depth)17/64" x 19/32"
Attachment spindle stroke1 7/8"
Attachment body stroke4"
Center height3'5 7/16"
Total height 5'6 5/32"
Floor space
Main body6' x 2'3 1/2"
Control4'3" x 1' 2 1/2"
Hydraulic1'10" x 1'2"
Machine weight (approximate)3740 lbs

Hydruliac unit
Oil pressure500 PSI
Tank capacity40 liters
Charge4.7 liters/minute
Electric unit
Incremental (U,W)/absolute (X,Z) mixed usage available
Control 2 axis contouring
InterpolationCircular and linear
Least input increment
X (dia) & Z-axis - (in selectable)0.0001"/0.00005"
Programming incrementas above
Tape code - EIA RS-244-A/ISO R84D/ASCII auto select,
parity H/V check
Feed rate - F5 digits direct or E7 digits direct designation
Feed designation
F5 digits direct designation
Synchronous feed inch/revolution G95
Asynchronous feed inch/minute G94 - changeable
Tape reader - photoelectric type, 200 characters/second
Maximum program dimension
Linear X (diameter) and Z-Axis+/-999.99995"
Circular X, Z-Axis+/-999.99995"
Cutting feed
(0 - 200%, 10% override)0.00005 - 0.2835 IPR
Page 3 of 3

Threading feed
(straight, taper and facing available)0.00005 - 0.2835 IPR
Tool offset - 16 pairs, maximum+/- 39.370"
Position detecting system - detected by sesolver for each axis
Position read out - zero point with reset possible
Spindle functionS3 digits
Canned cycles - straight taper continuous cutting, threading,
facing and multi cycle
Alarm displays - alarm contents display automatically
Buffer resistor - tape command for 1 block (63 ch) is read in
Other standard functions
Corner chamfering
Rounding & radius designation

MOTOR SPECIFICATIONS

2.2 kw Main drive motor
0.25 kw Motor for coolant oil
0.2 kw Motor for 3 spindle attachment
0.4 kw Motor for each X, Z-axis
0.75 kw Motor for hydraulic unit