6" X 18" LANDIS MODEL 1R PLAIN CYLINDRICAL GRINDER

Nominal work swing 6"
Distance between work spindles 18"
Maximum grinding diameter with standard wheel
zero diameter work on centers 10 1/2"
Work carriage traverse speed 2 - 240 IPM
Carriage traverse per turn of handwheel 200"
Swivel table graduated
- inches per foot 4"
- degrees included angle 20 degrees
Grinding wheel size 16" x 3" x 5"
Grinding wheel size spindle speeds 1500 & 1900 RPM
Maximum distance wheel centerline to work
centerline 12 1/2"
Minimum distance wheel centerline to work
centerline with footstock removed 3 1/2"
Work diameter reduction - per revolution of
handwheel 0.100"
fine feed knob 0.001"
Maximum hydraulic infeed - on diameter 0.090"
Rapid infeed stroke 1"
Headstock work center #10 Jarno
Footstock work center #6 Jarno
Headstock work speeds - RPM 60, 90, 150, 225, 400, 600
Diameter hole thru spindle 1"

MOTOR SPECIFICATIONS

5 HP 3/6/208-220/440 Wheel drive motor and controls
1 HP Hydraulic pump motor
1/4 HP Headstock motor
1/4 HP Wheel spindle lubrication motor
Coolant pump motor