6" X 30" CINCINNATI FILMATIC 6" R PLAIN CYLINDRICAL GRINDER

Capacity 6-15/16" x 30"
Maximum table travel 33 7/8"
Swivel table graduated to angle of
Towards wheel head 9 1/2 degrees
Away from wheelhead 1"
Grinding Wheelhead
Grinding wheel size 24" x 4"/5" x 12"
Spindle speed - for 24" diameter 1034 RPM
Headstock
Dead spindle
Work speeds (4) 97 to 395 RPM
Taper of work center No. 10 B&S
Automatic start & stop
Footstock
Taper of work center No. 10 B&S
Type - Screw & lever with diamond holder brackets
Table Traverse
Number of table traverse rates infinite
Range of table traverse rates 3 to 240 IPM
Minimum movement of automatic reversal 3/32"
Accuracy of table reversal at all traverse rates .004"
Tarry adjustment 0 to 5 seconds
Hand table traverse - rate per revolution of hand wheel
slow .200
rapid 5/8"
Infeed adjustments
Wheelhead movement per revolution of infeed hand wheel.050
Minimum infeed increment, diameter reduction .00005
Automatic pick feed at table reversal infinitely
variable
Diameter reduction .0002" - .005"
Overall dimensions 66 1/4" X 127 3/8" X 60 1/4" H
Approximate weight 7,200 lbs.

MOTOR SPECIFICATIONS

Grinding wheel - 7 1/2 HP, 1800 RPM, TEFCBB
Hydraulic - 1 HP, 1200 RPM, TEBB
Headstock - 3/4 HP, 1200 RPM, TEBB
Lubrication - 1/3 HP, TEBB
Coolant pump - 1/4 HP, TEBB
Control, including magnetic starters, transformers, separate
overload relays, built in disconnect device, mounted off
machine with ground detector lights