6" X 18" LANDIS MODEL 1R PRECISION PLAIN CYLINDRIC

Nominal work swing 6"
Nominal distance between work centers 18"
Maximum diameter work standard machine
will grind with full size standard wheel 6 7/8"
Coolant tank capacity 19 gallons
Carriage traverse per turn of handwheel 0.200"
Traverse speed 2 - 240 IPM
Swivel table graduated (inches per foot) 4
(degrees included angle) 20
Grinding Wheel
Size (standard) 16" x 1"
x 5"
Maximum width 3"
Grinding wheel speeds 1500 & 1900
RPM
Hydraulic rapid infeed stroke 1"
Total feed (stock removal) inches on dia. 0 to 0.999
in
increments
of 0.001
Fast feed (stock removal) inches on dia. 0 to 0.999
in
increments
of 0.001
Medium feed (stock removal) inches on dia. 0 to 0.099
in
increments
of 0.001
Microfeed (stock removal) inches on dia. 0 to 0.009
in
increments
of 0.001
Fast feed ips on diameter 0 to 0.0099
in
increments
of 0.0001
Medium feed ips on diameter 0 to 0.0099
in
increments
of 0.0001
Microfeed ips on diameter 0 to
0.00099 in
increments
of 0.00001
Approach feed rate ips on diameter 0 to 0.009
in
increments
of 0.001
Headstock work center #10 Jarno
Footstock work center #6 Jarno
Headstock work speeds (6) 60 - 600
RPM
Diameter of hole through spindle 1"
Headstock spindle nose 5 A2
Approximate weight 5,500 lbs

MOTOR SPECIFICATIONS

3 HP Wheel drive motor
1/4 HP Work drive motor
1/4 HP Wheel spindle lubrication motor
1/10 HP Coolant pump motor
1 HP Hydraulic and lubricating pump motor