14 SPINDLE DEKA MODEL HR-712-14

Height of machine95"
Floor to bottom of head flange61 1/4"
Feed stroke of table, maximum6"
Distance between head flange and table top -
- maximum26"
- minimum12"
Opening of head -
- front to back8 1/2"
- left to right13"
Center of head to face of ways on column8 1/4"
Number of spindle drives14
Working surface of table
- front to back14 1/2"
- left to right18 1/2"
Back edge of working surface table top to
face of ways on column1 3/4"
Overall table size
- front to back19"
- left to right24 1/4"
Distance between T-slots, center to center,
table top12"
Standard feeding stroke6"
Maximum feeding pressure2,800 lbs
Range of feeding0 to 90 IPM
Rapid traverse rate120"
Drilling mild steel at 60 SFM 3" feed per minute -
- (14)1/4 drills
- (10)5/16 drills
- (8)11/32 drills
Drilling gray cast iron at 70 SFM 4" fee per minute -
- (14)9/32 drills
- (10)3/8 drills
- (8)11/32 drills

Tapping mild steel (SAE 1112) -
- (14)8 - 32 NC
- (6)1/4 - 20 NC
- (4)5/16 - 18 NC
Tapping gray cast iron -
- (14)8 - 32 NC
- (10)1/4 - 20 NC
- (8)5/16 - 18 NC
Floor space -
- front to back49"
- left to right32"
Weight of machine2,300 lbs

MOTOR SPECIFICATIONS

3 HP 3/60/220/440 Main spindle drive motor
1 1/2 HP 3/60/220/440 Hydraulic pump motor