#118 CINCINNATI PLAIN AUTOMATIC HORIZONTAL MILLING

Table
Working surface 10" x 35
1/2"
Overall size 10" x 41"
Number of T-slots 3
Size of T-slots 11/16" Wide
Distance between T-slots 2 5/16"
Range
Longitudinal (power) 18"
Vertical (hand only - dial graduated in
thousandths of an inch) 8"
Maximum distance from centerline of spindle
to table 10"
Minimum distance from centerline of spindle
to table 1 3/4"
Distance from centerline of table to face
of column 8 7/16"
Full Width
Distance from the column face to inside of
arbor support without braces 18 1/4"
Distance from the column face to inside of
arbor support with braces 16"
Quill
Adjustment 2 3/8"
Diameter 5 1/2"
Maximum distance from end of spindle nose
to centerline of table T-slot 7 1/2"
Minimum distance from end of spindle nose
to centerline of table T-slot 5 1/8"
Minimum distance from end of spindle nose
to column face 15/16"
Overarm Rectangular
Distance from underside to centerline
of arbor 4 3/4"
Distance from floor to centerline of spindle 45 1/4"
Spindle - standard flanged spindle end with No. 40 series
taper
Diameter of nose 3 1/2"
Size of hole through 21/32"
Number of speeds (made with pick-off gears) 16
Speed range 50 to 1500
RPM
CON'T
Table Feeds
Number of feeds (made with pick-off gears) 16
Range 3/4" to 30
IPM
Power rapid traverse (to table only) 300 IPM
Net weight 3,150 lbs

MOTOR SPECIFICATIONS

3 HP Main drive motor
Coolant motor